Gulf Comanche
Guru
- Joined
- Dec 16, 2007
- Messages
- 1,045
- Location
- U.S.A.
- Vessel Name
- Old School
- Vessel Make
- 38' Trawler custom built by Hike Metal Products
Ignition Switch
- Thread starter Gulf Comanche
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
FF
Guru
- Joined
- Oct 12, 2007
- Messages
- 22,552
The push button start switch only engages a start solenoid so huge amps are not needed.
Any of the C-H units rated as start switches should be fine. C-H is a best choice for mos boat t switches.
Any of the C-H units rated as start switches should be fine. C-H is a best choice for mos boat t switches.
A 15 or 20 amp switch will work. It’s wired to the starter solenoid usually through a relay so it never sees the high amperage. Tractor Supply is a source as is most auto stores.
https://www.tractorsupply.com/tsc/product/cambridge-push-button-start-switch-15a-12v-dc-180w
https://www.hellamarine.com/en/products/accessories/switches/push-button-switch.html
https://www.tractorsupply.com/tsc/product/cambridge-push-button-start-switch-15a-12v-dc-180w
https://www.hellamarine.com/en/products/accessories/switches/push-button-switch.html
OP
OP
Gulf Comanche
Guru
- Joined
- Dec 16, 2007
- Messages
- 1,045
- Location
- U.S.A.
- Vessel Name
- Old School
- Vessel Make
- 38' Trawler custom built by Hike Metal Products
OK, thanks for the advise.
Pete Meisinger
Guru
- Joined
- Oct 7, 2012
- Messages
- 3,145
- Location
- USA
- Vessel Name
- Best Alternative
- Vessel Make
- 36 Albin Aft Cabin
NAPA or equivelant.
pete
pete
