Showing results 1 to 25 of 69
Search took 0.01 seconds.
Search: Posts Made By: Patrick4002
Forum: General Discussion 09-05-2022, 02:26 PM
Replies: 46
Views: 2,733
Posted By Patrick4002
i like to have a multi switch system that switch...

i like to have a multi switch system that switch different 220v circuits sepperate from invertor to shore/gen power with can be programed on time or service battery state.
now i have to build the...
Forum: General Maintenance 08-01-2022, 04:05 PM
Replies: 22
Views: 1,221
Posted By Patrick4002
first time it diddent stick, the problem was i...

first time it diddent stick, the problem was i did not get rid of the shiny top layer of the hypalon
(sorry for the bad englisch)
Forum: General Maintenance 08-01-2022, 02:42 PM
Replies: 22
Views: 1,221
Posted By Patrick4002
glue on tubes ribs

Hello, i have repaird 3 different tubes from ribs and attached ring to one
i use hard pvc glue for sanitair pipes, but you have to remove the scin of the pvc or hypalon i use a dremel tool for this...
Forum: Other Trawler Systems 07-08-2022, 04:02 PM
Replies: 17
Views: 1,089
Posted By Patrick4002
i have 5 reversable ac cruise air units in our...

i have 5 reversable ac cruise air units in our boat.
3x 12000 btu from 2000 1x 18000btu from 2000 and 1x 8000btu from 2005
the setup was with 1 water pump for all.

the 18000 btu has lost his...
Forum: General Discussion 06-18-2022, 08:37 AM
Replies: 117
Views: 5,713
Posted By Patrick4002
In our previous boat we have 2 engines 2x170hp...

In our previous boat we have 2 engines 2x170hp and do most of the handeling with it. the boat was 38ft had a bow and stern truster, i used them only with close space docking (3feet in front an after...
Forum: General Discussion 06-14-2022, 01:38 PM
Replies: 172
Views: 7,293
Posted By Patrick4002
for me is the main thing that i haven redundency...

for me is the main thing that i haven redundency with 2 motors. in the past 14 years i have needed it.
1 time a propeller bend,
2 times a gearbox problem
on our new (old) boat a engine heat alarm...
Forum: Other Trawler Systems 06-03-2022, 01:14 PM
Replies: 0
Views: 144
Posted By Patrick4002
starting a hbo system 10/600 watermaker

Hello,
in our trawler we have a hbo system 10/600 watermaker build in

It isent used for some period and we want to start it back up
i dont now how long it is sitting unused

anny sugestions -...
Forum: General Discussion 06-03-2022, 01:09 PM
Replies: 53
Views: 3,375
Posted By Patrick4002
Hallo we had different binoculars in the pas, all...

Hallo we had different binoculars in the pas, all work fine.
in our firm we where working with zeis lasers equipment
when we visit the company we visit the zeis museum in Jena Germany
and...
Forum: General Discussion 05-27-2022, 03:33 PM
Replies: 28
Views: 2,779
Posted By Patrick4002
we are living on board, i have changed the g4 to...

we are living on board, i have changed the g4 to leds, the voltage is stailized at 12,3v and afther 6 months they stop working or fade. i have tryed 3 diferent suplyers. so i started becj to use 10w...
Forum: General Maintenance 05-12-2022, 11:34 PM
Replies: 3
Views: 355
Posted By Patrick4002
thanks, they are protected from the sun, under...

thanks,
they are protected from the sun, under the aluminium top and bottom
Forum: General Maintenance 05-11-2022, 01:13 AM
Replies: 3
Views: 355
Posted By Patrick4002
in search of door wheels trader 54

Hallo All,

Our trader doors ars very hard to open/close

on inspection i found that the wheels under the door are broken
dus anny body now where to find replacements

there are 2 wheels in...
Forum: General Maintenance 03-30-2022, 12:09 AM
Replies: 7
Views: 1,048
Posted By Patrick4002
many thanks all for thinking to get a simple good...

many thanks all for thinking to get a simple good selution.
I can not access the underside without extensive cutten of the deck or side
there is a plate under the pole but i think one of the 2...
Forum: General Maintenance 03-28-2022, 12:38 AM
Replies: 7
Views: 1,048
Posted By Patrick4002
make access plate

the constuction of the pole in quistion, is very difficult to cut a access plate, t have to cut in the teak of the deck to access and there are several beams inside witch i now not the exact place
...
Forum: General Maintenance 03-27-2022, 11:57 AM
Replies: 7
Views: 1,048
Posted By Patrick4002
how to fix loose handrail

Hello, on our trader we have on the side entrance 2 handrail poles that are loos to one side, who nows how these are mounted ?

or houw to inprove the mounting ?

on the back i can remove the...
Forum: Power Systems 03-17-2022, 01:20 AM
Replies: 4
Views: 602
Posted By Patrick4002
great, i dont now if i can get them in europe

great, i dont now if i can get them in europe
Forum: Power Systems 03-16-2022, 12:06 PM
Replies: 4
Views: 602
Posted By Patrick4002
thanks, i purchaced them from Italy, they are...

thanks, i purchaced them from Italy, they are original new spares from cat but from ebay, i have now a spare set will swap with the current ones and try to clean them, thanks for the sugestion.
Best...
Forum: Power Systems 03-11-2022, 12:58 PM
Replies: 4
Views: 602
Posted By Patrick4002
new cat 3208ta primaire air filter

Hello,

i just got 2 new primaire air filter ellements for my 3208ta 435hp

they seem just a 1cm thick sort of black foam with a square upstanding bit om the side, cost a lot of money.

Is...
Forum: General Discussion 03-07-2022, 02:21 PM
Replies: 75
Views: 5,160
Posted By Patrick4002
i have used 3 different sets, the cheap ones work...

i have used 3 different sets, the cheap ones work but we eventuly have gone for the peltor III headsets expencive but how mutch cost it when you have a bad docking ?
peltor make them for the marine,...
Forum: Electrical and Electronics & Navigation 02-01-2022, 12:09 PM
Replies: 24
Views: 2,332
Posted By Patrick4002
only on industrial full traction you can have a...

only on industrial full traction you can have a aqua-auto-fill option, each cell then has a floting valve to fille the water level up when charging in the equlization state of the loading process.
...
Forum: Electrical and Electronics & Navigation 02-01-2022, 03:06 AM
Replies: 24
Views: 2,332
Posted By Patrick4002
i have a different setup but every system has his...

i have a different setup but every system has his pro en cons.
we live aboard and need a lot of elektricity

the main service bank is 24v 650ah full traction
pro : very stable and last +10...
Forum: Power Systems 01-27-2022, 11:50 PM
Replies: 4
Views: 239
Posted By Patrick4002
thanks for the info

i have now the operating and spare parte manuel

thats all i need for my jobs, working on the motor is not for myself

thanks all for helping out.

Best regards
Patrick
Forum: Power Systems 01-27-2022, 03:07 PM
Replies: 4
Views: 239
Posted By Patrick4002
thanks this is great, i had only the spare part...

thanks this is great, i had only the spare part manuel

this one gives a layout of the motor wath is great

Best regards,
Patrick
Forum: Power Systems 01-27-2022, 10:56 AM
Replies: 4
Views: 239
Posted By Patrick4002
searching manual onan MDL3 15kva

hallo,

I have a onan MDL3 15kva genset on board, he runs fine,
but i want to do a preventive mantenance, check oil, cooling, impeller, filters

i have never workt on a generator of onan and...
Forum: General Discussion 12-27-2021, 11:32 PM
Replies: 91
Views: 6,690
Posted By Patrick4002
solar power optimized

Hello im Patrick and we have a trader 54 i put my after sundeck and the sides of my gangway roof full of solar panels, i also put 3 on the front deck
so i get a 3400w array

one of the tings is...
Forum: Power Systems 12-05-2021, 02:34 AM
Replies: 4
Views: 623
Posted By Patrick4002
thanks for taking the time

the complete service manuel i found free on :

https://www.dieselpartsdirect.com/documents/twin-disc/mg-507-1-service-manual.pdf

on page 18 the hydraylic system is explaind and om page 27 is the...
Showing results 1 to 25 of 69

 
Forum Jump


All times are GMT -5. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012