jefndeb
Guru
Shaft Shark Line and Weed Cutter for 2" Shaft Diameter-
Manufacturers Description-
The Shaft Shark is a serrated edge disc, machined from high quality type 316 stainless steel. The internal diameter is machined to fit the shaft diameter of your boat - either metric or standard. Attached to your propeller shaft, it rotates with the shaft, cutting anything that might try to become entangled around your shaft and prop. Shark Shaft cuts through lines, nets and other underwater debris as soon as it catches.
Installation is simple and quick. No drilling or tapping and no need to remove the propeller for installation. Can easily be installed underwater by a diver. The Shaft Shark requires just a small clearance fore and aft between the cutlass bearing and the propeller hub. This dimension allows for sufficient clearance with the cutlass bearing for shaft movement when maneuvering and for water-flow through the cutlass bearing. Always install the Shaft Shark as close to the propeller as possible.
Notes-
This unit was only installed for 5 months and then removed and kept as a spare, it is the previous version to the current Shaft Shark SS600, (basically the same unit)
It was reconditioned, sharpened and polished at a local Prop shop.
Price is $395 plus USPS shipping to your zip.
Payment via Paypal or Venmo
Send me a PM if interested.
Manufacturers Description-
The Shaft Shark is a serrated edge disc, machined from high quality type 316 stainless steel. The internal diameter is machined to fit the shaft diameter of your boat - either metric or standard. Attached to your propeller shaft, it rotates with the shaft, cutting anything that might try to become entangled around your shaft and prop. Shark Shaft cuts through lines, nets and other underwater debris as soon as it catches.
Installation is simple and quick. No drilling or tapping and no need to remove the propeller for installation. Can easily be installed underwater by a diver. The Shaft Shark requires just a small clearance fore and aft between the cutlass bearing and the propeller hub. This dimension allows for sufficient clearance with the cutlass bearing for shaft movement when maneuvering and for water-flow through the cutlass bearing. Always install the Shaft Shark as close to the propeller as possible.
Notes-
This unit was only installed for 5 months and then removed and kept as a spare, it is the previous version to the current Shaft Shark SS600, (basically the same unit)
It was reconditioned, sharpened and polished at a local Prop shop.
Price is $395 plus USPS shipping to your zip.
Payment via Paypal or Venmo
Send me a PM if interested.
