05-31-2012, 05:47 PM
|
#1
|
Member
Join Date: Mar 2011
Posts: 7
|
Pump out fitting for Hershine Trawler.
I'm heading south this summer with the Schooner Cove Y.C. and will require a male camlock fitting to attach to the pump out station's hose. I haven't had the necessity to do this before as I generally travel far up north where there are no P.O. stations. The deck fitting appears to be metric, it's close to 1 3/4inches in diameter with 16 T.P.I. Is there anyone out there that has hooked their Taiwanese trawler up to the pump out, if so how did you do it?? If I could get ahold of a fitting, I could modify it to work. The only fittings here are the standard 1 3/4 in. pipe threads
|
|
|
05-31-2012, 06:51 PM
|
#2
|
Guru
Join Date: Jun 2008
Posts: 5,037
|
At work I have dimensions for what fits my 1983 Albin. I'll post tomorrow
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
|
|
|
05-31-2012, 06:53 PM
|
#3
|
Guru
City: Missourah
Vessel Name: M/V Scout
Vessel Model: Sundowner Tug 30'
Join Date: Jul 2010
Posts: 645
|
My Taiwanese trawler deck fittings are Perko. No problemo. Maybe time (easiest) to change out your deck fittings.
|
|
|
05-31-2012, 08:16 PM
|
#4
|
Guru
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
|
[QUOTE=Anode;88985]My Taiwanese trawler deck fittings are Perko. No problemo. Maybe time (easiest) to change out your deck fittings.[/QUOTE]
That is what I did, after much searching for a camlock adapter for my metric thread pumpout fitting I bought a new Std. one for about $40.00 about an hour later it was installed on the deck, on the existing hose and has solved the problem.
Steve W
|
|
|
05-31-2012, 08:32 PM
|
#5
|
Guru
City: Cary, NC
Vessel Name: Skinny Dippin'
Vessel Model: Navigator 4200 Classic
Join Date: Jul 2009
Posts: 5,841
|
I picked up several fittings at Grainger for just a few bucks each.
__________________
2000 Navigator 4200 Classic
(NOT a trawler)
|
|
|
05-31-2012, 09:07 PM
|
#6
|
Member
Join Date: Mar 2011
Posts: 7
|
Thanks for your reply. The fittings you acquired, were they metric? If so, that would be great. Would you mind passing on more info for Grainger?
Thanks.
Bob
|
|
|
05-31-2012, 09:18 PM
|
#7
|
Guru
City: Philadelphia
Vessel Name: Dreamers Holiday
Vessel Model: Mainship 390
Join Date: Jun 2010
Posts: 572
|
are you sure you need to connect to the threads? I do my boating mostly in the Delaware River, Bay, Chesapeake Bay and Jersey shore and have not required a threaded connector in a few years. All of the pump out hoses have a suction cup on the end that you just hold over your fitting.
John
|
|
|
05-31-2012, 09:28 PM
|
#8
|
Member
Join Date: Mar 2011
Posts: 7
|
I have heard horror stories about these suction cup devices not being connected properly and spewing smelly stuff all over the deck. Being the first time at doing this, I do not know what to believe. It would be great if it would work.
Thank you.
Bob
|
|
|
05-31-2012, 10:12 PM
|
#9
|
Senior Member
Join Date: Nov 2007
Posts: 129
|
The flexible nozzles work just fine, you just need to keep pressure on them. At most pumpout stations in Washington State you will only find the flexible nozzles. Some stations may have the camlock adapters and will probably have three or four different threaded adapters for your use. If you have never pumped out here's the technique:
1. Open up your deck mounted waste fitting.
2. Unspool enought of the hose from the dock to reach the boat.
3. Insert the flexible nozzle into your waste fitting.
4. Turn on the valve at the nozzle (on is parallel to the hose flow direction, off is perpendicular to flow).
5. Have your first mate push the green "on" button located on the pumpout pedestal.
6. Keep downward pressure on the flexible nozzle while the waste is removed.
7. When all the waste is out of the tank you will see bubbles and air evident throught the transparent view portion at the nozzle. Tell your firstmate to turn off the pump by pressing the red "off" button.
8. Now turn the valve 90 degrees to close.
9. Return the hose to the pedestal.
10. Close your deck port.
|
|
|
05-31-2012, 10:25 PM
|
#10
|
Member
Join Date: Mar 2011
Posts: 7
|
Thank you one and all for the great feedback, I'm probably worrying too much. I like the idea of pumping out rather than dumping. However, up here in Canada, particularly farther up north the pump out stations are few and far between. I have a large holding tank and can wait till we are well out in open water before dumping.
Thanks again.
Bob
|
|
|
05-31-2012, 10:56 PM
|
#11
|
Guru
City: Miami Florida
Vessel Name: Possum
Vessel Model: Ellis 28
Join Date: Aug 2011
Posts: 5,308
|
Edson sells a lot of pump out adapters.
Waste Deck Fittings & Adapters : Edson Pump Store
All of the pump out stations I've visited in South Florida use the rubber nozzle fittings on the end of their hose. You just stick them in the deck fitting and turn on the suction.
|
|
|
06-01-2012, 06:08 AM
|
#12
|
Guru
City: Cary, NC
Vessel Name: Skinny Dippin'
Vessel Model: Navigator 4200 Classic
Join Date: Jul 2009
Posts: 5,841
|
Quote:
Originally Posted by Bob1430
Thanks for your reply. The fittings you acquired, were they metric? If so, that would be great. Would you mind passing on more info for Grainger?
Thanks.
Bob
|
No need to pay $15-$50 when you can pay less than $4!
Cam Lever Couplings and Gaskets - Fittings - Grainger Industrial Supply
__________________
2000 Navigator 4200 Classic
(NOT a trawler)
|
|
|
06-01-2012, 06:08 AM
|
#13
|
Guru
Join Date: Jun 2008
Posts: 5,037
|
Here's a pic of the one left on the boat by the previous owner. Looks like he had two pieces pressed together.
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
|
|
|
06-01-2012, 07:25 AM
|
#14
|
Guru
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
|
Quote:
Originally Posted by GonzoF1
|
Do any of these have metric male threads so they can screw into a deck fitting with female metric threads?
Steve W
|
|
|
06-01-2012, 08:39 AM
|
#15
|
Member
Join Date: Mar 2011
Posts: 7
|
Deck fitting.
Thanks Tom, I have just sent an email to see if they have a fine thread version.
Jleonard, Thanks for that, The picture shows exactly what I would do if I could find an another Taiwanese (fine thread) deck fitting. It's not s difficult thing to modify, a lot easier than change the whole deck fitting.
|
|
|
06-01-2012, 09:40 AM
|
#16
|
Guru
City: Everett Wa
Vessel Name: Eagle
Vessel Model: Roughwater 58 pilot house
Join Date: Oct 2007
Posts: 2,919
|
I delete response
|
|
|
06-01-2012, 10:58 AM
|
#17
|
Guru
City: Hotel, CA
Join Date: Sep 2011
Posts: 8,323
|
Quote:
Originally Posted by Steve
Do any of these have metric male threads so they can screw into a deck fitting with female metric threads?
Steve W
|
Steve it sounds like you are possibly describing hose threads not metric. Hose is straight tapped rather than tapered and often confused with metric. I have also found hose threads to come in various "seemingly" odd sizes.
|
|
|
06-01-2012, 11:16 AM
|
#18
|
Guru
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,151
|
don't necessarily think metric...a lot of Taiwanese boats have weird british threads on their threaded rod. 1/2 inch 12 tpi ( British Standard Whitworth (BSW) instead of 1/2 13 tpi....transon zincs, stuffing boxes both rudder and prop shaft, mast bolts, etc..etc..
the moral is...look further or buy the flexible snoot adapter that most marinas use anyhow. Even a bit of dribble or splashing can't be as bad as some of the threads ya gotta read around here...
|
|
|
06-01-2012, 10:18 PM
|
#19
|
Senior Member
Join Date: Aug 2010
Posts: 191
|
Bob, what size and model Hershine do you have?
__________________
Steve Pryor
1979 Hershine 37
Lilli Belle
The Great North West
|
|
|
06-02-2012, 07:05 AM
|
#20
|
TF Site Team
City: Saltspring Island
Vessel Name: Retreat
Vessel Model: C&L 44
Join Date: Nov 2007
Posts: 5,663
|
Bob:
Check out Princess Auto. Lots of fittings, many different sizes, threads, materials.
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|