firehoser75
Guru
- Joined
- Feb 18, 2018
- Messages
- 1,705
- Location
- Canada
- Vessel Name
- former owner of "Pilitak"
- Vessel Make
- Nordic Tug 37
Looking for some opinions. I have a dual Racor S3209 spin on primary fuel filter system on my boat. This winter, I am planning on putting new filters on the primary and the on engine filter. For the past 2 years and about 500 hours I have used only one side of the "dual" filter. So my question is, should I just switch to the "old" unused filter (Racor) and replace just the used one, or do I need to replace both. Either way, I will replace the on engine one as well. My fuel looks very clean in the see through bowls, and the vacuum gauge still shows only about 5-6 inHG at WOT.
For info, the engine is a 2002 Cummins 6BTA 330hp with 2100 hours and is running very well.
Thanks for the opinions,
Tom
For info, the engine is a 2002 Cummins 6BTA 330hp with 2100 hours and is running very well.
Thanks for the opinions,
Tom