Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-18-2017, 06:08 AM   #1
Guru
 
City: Seaford Va on Poquoson River, VA
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,264
Synthetic auto trans fluid

I thought about using it in a borg warner velvet drive on the boat.
It is a gear reduction with clutch plates, like auto trans are made.
I have read trans run cooler, cooler is good for longer life.
Do you think it would lower friction?
Would you use any less fuel?

Normally I use typical Dexron.
sdowney717 is offline   Reply With Quote
Old 05-18-2017, 06:13 AM   #2
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
I would say that if you normally use dexron and everything is fine stick with it and you will still be happy as everything will still run fine

L.
Lou_tribal is offline   Reply With Quote
Old 05-18-2017, 06:41 AM   #3
Guru
 
kchace's Avatar
 
City: Brookline, NH
Vessel Name: Shalloway
Vessel Model: Defever 44, twin Perkins
Join Date: Sep 2013
Posts: 2,260
Quote:
Originally Posted by sdowney717 View Post
I thought about using it in a borg warner velvet drive on the boat.
It is a gear reduction with clutch plates, like auto trans are made.
I have read trans run cooler, cooler is good for longer life.
Do you think it would lower friction?
Would you use any less fuel?

Normally I use typical Dexron.
When in forward, everything is locked so the only friction is in the bearings and the assemblies spinning within the oil. My personal concern would be compatibility with the clutch material. Newer transmissions may use a completely different type of material - older type materials may or may not be compatible with newer/synthetic oils.

Ken
kchace is offline   Reply With Quote
Old 05-18-2017, 06:44 AM   #4
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
Jleonard on this form I believed switched to a synthetic lube, but not sure what.

He rebuilt his own transmission I believe, and has working knowledge of them from an engineering standpoint.

If he doesn't respond...might try a PM.
psneeld is online now   Reply With Quote
Old 05-18-2017, 07:14 AM   #5
Guru
 
City: Carefree, Arizona
Vessel Name: sunchaser V
Vessel Model: DeFever 48 (sold)
Join Date: Apr 2008
Posts: 10,186
The book for your installation says--- ?

Where synthetics really shine is in boats that have a coolant cooled high engine speed gear reducer - transmission with temperatures approaching engine temps. In raw water cooled (mine run below 115F in the PNW) transmissions slow RPM and cooler running transmissions the advantage if any would be hard to quantify, possibly injurious as suggested by kchace.
sunchaser is offline   Reply With Quote
Old 05-18-2017, 07:40 AM   #6
Guru
 
City: Seaford Va on Poquoson River, VA
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,264
Quote:
Originally Posted by sunchaser View Post
The book for your installation says--- ?

Where synthetics really shine is in boats that have a coolant cooled high engine speed gear reducer - transmission with temperatures approaching engine temps. In raw water cooled (mine run below 115F in the PNW) transmissions slow RPM and cooler running transmissions the advantage if any would be hard to quantify, possibly injurious as suggested by kchace.
My book is from 1970. Trans fluids have changed a lot in 50 years.
From what I understand, modern fluids are backwards compatible to Dexron ratings. Dexron 6 is the new Dexron. It does cost more which is why I never used the newer fluids.
sdowney717 is offline   Reply With Quote
Old 05-18-2017, 08:45 AM   #7
Guru
 
Nomad Willy's Avatar
 
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
I think the most common problem w BW gears is oil seals.

Most or all the early synthetic lube oil problems w seals have been solved so there shouldn't be any problems w the syn gear oil. However from what I've read they put in an additive to counteract the swelling, hardeding or whatever the seal problem was or would still be w/o the additive. Like VI additives I'm sure this additive has little or no lubricating qualities but if there was any mistake in adding the stuff questionable results could happen.

The only reason to use syn is for high heat applications like racing engines or cars/trucks pulling a heavy trailer up a steep mountain pass in the desert. But unless there's something wrong w your equipment temps experienced in slow speed yachts run by old men should be way below the temps that need or benefit from syn lubricants.

Since you don't need it for heat and there's a remote chance it could cause seal problems regular Automotive trans oil is totally adequate and IMO a better choice.
__________________
Eric

North Western Washington State USA
Nomad Willy is offline   Reply With Quote
Old 05-18-2017, 09:11 AM   #8
Guru
 
City: Carefree, Arizona
Vessel Name: sunchaser V
Vessel Model: DeFever 48 (sold)
Join Date: Apr 2008
Posts: 10,186
Quote:
Originally Posted by sdowney717 View Post
My book is from 1970. Trans fluids have changed a lot in 50 years.
Hummm, 50 years. Seems like the fluid you have been using and the boat's upkeep have done pretty well.

sunchaser is offline   Reply With Quote
Old 05-18-2017, 09:11 AM   #9
Guru
 
City: Seaford Va on Poquoson River, VA
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,264
Quote:
Originally Posted by Nomad Willy View Post
I think the most common problem w BW gears is oil seals.

Most or all the early synthetic lube oil problems w seals have been solved so there shouldn't be any problems w the syn gear oil. However from what I've read they put in an additive to counteract the swelling, hardeding or whatever the seal problem was or would still be w/o the additive. Like VI additives I'm sure this additive has little or no lubricating qualities but if there was any mistake in adding the stuff questionable results could happen.

The only reason to use syn is for high heat applications like racing engines or cars/trucks pulling a heavy trailer up a steep mountain pass in the desert. But unless there's something wrong w your equipment temps experienced in slow speed yachts run by old men should be way below the temps that need or benefit from syn lubricants.

Since you don't need it for heat and there's a remote chance it could cause seal problems regular Automotive trans oil is totally adequate and IMO a better choice.
Yes, trans certainly does not get as hot as a car or truck. Every 20* temp drop in them I read doubles their expected life if they experience high temperature running.

I rebuilt one velvet drive myself due to a leak. Rust had built up on cast iron pump body surface causing the black square O-ring to weep fluid. they are very simple inside compared to auto trans construction.

All the seals, rubbers, friction plates were in such good shape, like new, I saved them.
My thinking with synthetic is a friction reduction, so ever so slightly improved HP transfer to the props.
I checked my fluid and it had been a few years. It was a beautiful clear red.
Dexron III, is what I use. The fluid looks so good, I don't think it is worth changing. They are the older style series 72c inline velvet drives with 2.57 to 1 reduction gears.

This month I replaced the shaft coupling with a split one. You can see the bolt on flange in the reduction unit which signifies it is the older style gear reduction.

I like the split coupler so much more. It is beefier, a real strong design. My runout is now .000 to .002 between the flanges. I am hoping that means my shaft is not bent.
Attached Thumbnails
20170425_170407.jpg  
sdowney717 is offline   Reply With Quote
Old 05-18-2017, 09:46 AM   #10
Dauntless Award
 
Wxx3's Avatar
 
City: Wrangell, Alaska
Vessel Name: Dauntless
Vessel Model: Kadey Krogen 42 - 148
Join Date: Jan 2013
Posts: 2,820
What temperature does your transmission run?
__________________
Richard on Dauntless,
New York

a Kadey Krogen 42 currently: https://share.garmin.com/dauntless
Blog:
https://dauntlessatsea.com
Wxx3 is offline   Reply With Quote
Old 05-18-2017, 10:06 AM   #11
Guru
 
twistedtree's Avatar
 
City: Vermont
Join Date: Jan 2013
Posts: 10,092
I have heard that synthetic oil in gears can cause clutch slippage precisely because the oil is slipperier. I think that was with motor oil, but I would have the same concert with ATF.

Perhaps call BW and see what they say?
__________________
MVTanglewood.com
twistedtree is offline   Reply With Quote
Old 05-18-2017, 10:19 AM   #12
Guru
 
City: Seaford Va on Poquoson River, VA
Vessel Name: Old Glory
Vessel Model: 1970 Egg Harbor 37 extended salon model
Join Date: Jan 2016
Posts: 2,264
I don't have a gauge, but I can keep my hands on them. So maybe 120* tops, just a guess.
sdowney717 is offline   Reply With Quote
Old 05-18-2017, 11:14 AM   #13
Technical Guru
 
Ski in NC's Avatar
 
City: Wilmington, NC
Vessel Name: Louisa
Vessel Model: Custom Built 38
Join Date: Jan 2014
Posts: 6,194
A more slippery lube is not good in wet clutches. Clutches count on friction to avoid slipping, and slipping burns them up in short order. Make sure the fluid you use is compatible with what was originally spec'd.

I see no advantage to syn in this app.
Ski in NC is offline   Reply With Quote
Old 05-18-2017, 12:01 PM   #14
Guru
 
GoneFarrell's Avatar
 
City: Columbia City, OR & Mulege, BCS
Vessel Name: Imagine
Vessel Model: Farrell 34
Join Date: Oct 2015
Posts: 848
Synthetic ATF is designed to work with wet clutches, that's what is in all automatic transmissions. For me the main advantage is the stuff has a flatter viscosity curve, cold to hot. Not an issue for normal stock boat transmissions. I think that most people think it is more slippery, because it is not as viscous when cold or in the bottle vs. dino ATF.

I use it for fork and shock oil in motorcycles because the flatter viscosity curve yields more consistent damper behavior cold to hot, works good for that application.
GoneFarrell is offline   Reply With Quote
Old 05-18-2017, 03:26 PM   #15
Guru
 
jleonard's Avatar
 
Join Date: Jun 2008
Posts: 5,037
I went with synthetic 5-30 motor oil after a discussion with an "experienced timer" at my local BW distributor.
So far so good after 19 seasons. Temp stays nice and cool too.
jleonard is offline   Reply With Quote
Old 05-18-2017, 04:29 PM   #16
Veteran Member
 
City: Gig Harbor
Vessel Name: SEAFOOD
Vessel Model: Striker 44 Sportfish
Join Date: May 2016
Posts: 78
Velvet Drive Transmissions use clutch packs from Allison Heavy Duty Transmissions, and therefore in their manual (when I have reviewed it in the past) they refer to Allison Spec TES-295, which calls for Dextron type Automatic Transmission Fluid.

Castrol Trans-Syn is the Allison "standard" Synthetic Transmission fluid, and is suitable for all Allison Automatic Transmissions as it meets the specifications of TES-295.

Take a look in the manual for the transmission...what does it specify?

For what its' worth in Heavy Duty Allison Transmissions (when I left that business 10 years ago) it was required to run Synthetic to keep the 5yr/500,000 mile warranty.
pacopico is offline   Reply With Quote
Old 05-18-2017, 05:16 PM   #17
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
Excuse my question if it is just showing my ignorance but what would be the expected benefit to put syntech oil in a transmission except paying more to get the same? I put syntech oil in my porsche where the engine start turning at 4000 rpm... my boat runs at 1800 rpm at cruising speed, has a tractor engine and the transmission (same has yours) was made when internet was not existing... not sure I understand the expected result or benefit.

L.
Lou_tribal is offline   Reply With Quote
Old 05-18-2017, 05:44 PM   #18
TF Site Team
 
Bacchus's Avatar
 
City: Seneca Lake NY
Vessel Name: Bacchus
Vessel Model: MS 34 HT Trawler
Join Date: Nov 2014
Posts: 7,826
Allison doubled the warranty coverage with syn fluid. They recommend TranSynd. MY Mainship has ZF Trans and TranSynd is on their acceptable/recommended list.
I figured if it's goid for Allison I'd keep boat & motorhome the same...TranSynd for me...not sure what Velvet Drive recommends...I'd check w them.
__________________
Don
2008 MS 34 HT Trawler
"Bacchus"
Bacchus is offline   Reply With Quote
Old 05-18-2017, 05:46 PM   #19
Guru
 
kchace's Avatar
 
City: Brookline, NH
Vessel Name: Shalloway
Vessel Model: Defever 44, twin Perkins
Join Date: Sep 2013
Posts: 2,260
Quote:
Originally Posted by Bacchus View Post
?...not sure what Velvet Drive recommends...I'd check w them.
They recommend Dexron III.
kchace is offline   Reply With Quote
Old 05-18-2017, 06:22 PM   #20
Guru
 
Nomad Willy's Avatar
 
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
Quote:
Originally Posted by kchace View Post
They recommend Dexron III.
No reason to use anything else.
__________________
Eric

North Western Washington State USA
Nomad Willy is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 03:44 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012