I did not want to pull my water pump impeller to run Barnacle Buster through the engine. So I used my Sea Flush tool that I use for winterizing my engines. Used it to suck the BB into the engine and let it sit for the recommended time, maybe 6 or 7 hours, and then started the engines to flush the BB out. After when I ran the engines one dropped 5 degrees and the other engine dropped 10 degrees. Very simple process, took about 5 minutes per engine to put the BB in and then just run the engines.
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
|