|
05-10-2018, 08:57 AM
|
#1
|
Senior Member
City: La Conner, WA
Vessel Name: Agnus Dei
Vessel Model: 36' Shin Shing
Join Date: Sep 2014
Posts: 276
|
sealing shaft log threads
Hi All,
Got the stuffing box off the shaft log. After getting the screws out of the crossmember, the stuffing box just unscrewed from the shaft log. I have reconstructed the crossmember and all is set to go back in. The thread fit between the stuffing box and the shaft log is very sloppy (I'm confident this is where my leak was from). Any recommendations for sealing the threads. I don't want to 5200 them as the stuffing box is a removable/replaceable item.
Dave
__________________
GOD, Family, career
|
|
|
05-10-2018, 09:23 AM
|
#2
|
Guru
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
|
I have never see a box where the threads sealed anything. They usually serve to compress the packing against the other half and the shaft. That is where the water is stopped not the threads.
|
|
|
05-10-2018, 09:53 AM
|
#3
|
Senior Member
City: La Conner, WA
Vessel Name: Agnus Dei
Vessel Model: 36' Shin Shing
Join Date: Sep 2014
Posts: 276
|
I’ll have to send pictures. If you’ve never tore into a Taiwanese Trawler, you wouldn’t “picture” it.
__________________
GOD, Family, career
|
|
|
05-10-2018, 11:14 AM
|
#4
|
Guru
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,149
|
I understand, not sure why any good inert pipe thread sealant wouldnt work....thicker the better, but water pressure here isnt a huge factor.
|
|
|
05-10-2018, 01:13 PM
|
#5
|
Guru
City: Signal Mtn., TN
Vessel Name: Stella Maris
Vessel Model: Defever 44
Join Date: Feb 2012
Posts: 2,742
|
I’m having trouble visualizing it as well. Is the slop in wood, fiberglass or metal?
3M 4000 is less tenacious than 5200–but still very strong—and will supposedly bond to metal (unlike 4200). It’s also rated for below the waterline and cures in about 24 hours in mild temps. It’s fairly thick stuff so might help with small voids. I just used some on my stuffing box raw water injection plumbing, which I’ll post about separately.
|
|
|
05-10-2018, 03:34 PM
|
#6
|
Guru
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
|
Threads meant to seal are tapered. Are yours tapered or straight??
|
|
|
05-10-2018, 10:35 PM
|
#7
|
Senior Member
City: La Conner, WA
Vessel Name: Agnus Dei
Vessel Model: 36' Shin Shing
Join Date: Sep 2014
Posts: 276
|
Here are some photos. Got it all back together... used some thread goo. Glassing in the new crossmember now. Those are threads on the end of the shaft log.
|
|
|
05-10-2018, 10:37 PM
|
#8
|
Enigma
City: Slicker?
Join Date: Oct 2007
Posts: 16,566
|
Greetings,
Mr, DE. Ahhh...I see now. Yup, thread goo should do it.
__________________
RTF
|
|
|
05-10-2018, 11:31 PM
|
#9
|
Guru
City: Anacortes
Join Date: Nov 2012
Posts: 1,189
|
I’ve developed a tendency to carry multiple cans of rector seal #5 for anything that has threads, including the prop nut, big or little. I don’t know what’s in it, but if you use it, it doesn’t leak.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 09:06 PM.