Exhaust Riser 1974 Ford Lehman 2715E - Riviera Beach FL

[bluepearl]

The exhaust riser on our 1974 Ford Lehman 2715E has rusted away.

I need to get a new one or one fabricated. It has a flange with 8 bolt holes and the raw water irrigation intake on the elbow. It does not look like the original.

Does anyone know of a place in South Florida near Riviera Beach or a welder that does good work?

Help much appreciated.

 

[Ski in NC]

Post a pic of what you have. It does not have to be identical to what you have now, just needs to fit the manifold and have same hose size and close to the same angle. Figuring you have the standard Ford manifold.

 

[bluepearl]

Photo

Here is a photo. The 3 inches of hose next to the flange is just for illustration purposes and is not fitted to the boat. That hose section should be metal. It is just an example of what it looks like.

 

[RT Firefly]

Greetings,
Mr. b. Have you contacted either American Diesel or Bomac Marine?