Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-24-2022, 07:28 PM   #1
Member
 
City: Ocean View, HI
Join Date: May 2022
Posts: 11
Early 70's Detroit 4-53

Hello Everyone,

I am wondering the general thoughts of this propulsion system..? I have heard really good things of Detroit Diesels, and I'm assuming this model would be no different.

I am also wondering about the serviceability of this engine. Are parts still readily available? If a rebuild was needed, would it be worth the effort over repower with something newer? I realize this is a very general question, and more details would be needed for an accurate opinion... If a repower was in order, I would welcome your opinions/suggestions on modern day equivalent to these powerplants.

My apologies if this has already been discussed... If so, please direct me to the thread. I was not able to find such a thread in my searches.

Thanks in advance!
Kirkos
Kirkos is offline   Reply With Quote
Old 05-24-2022, 07:42 PM   #2
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,187
They are noisy and generally leak. But parts are available and they tend to run forever. They are loud but it is a throaty noise so to me they sound great. You can get more efficient engines with newer technology but will it ever payoff? Probably not.
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
Comodave is offline   Reply With Quote
Old 05-24-2022, 08:06 PM   #3
Veteran Member
 
City: Cedar City
Join Date: Dec 2021
Posts: 81
The "throaty roar" you speak of is the two stroke engine firing twice as many times as a four stroker per revolution,,,and they were not designed to leak and can be made oil tight with some effort..>>>Dan
utclmjmper is offline   Reply With Quote
Old 05-24-2022, 08:13 PM   #4
Guru
 
Sailor of Fortune's Avatar
 
City: St Augustine,Fl
Join Date: Sep 2009
Posts: 3,798
still parts available...but even DD 2 stroke parts are getting harder to find. I'd rebuild and wouldn't hesitate if it was in a boat that I really liked and was considering buying.. You don't provide many details so...
__________________
Jack ...Chicken of the sea! Been offshore 3 miles once
Sailor of Fortune is offline   Reply With Quote
Old 05-24-2022, 08:55 PM   #5
TF Site Team
 
Insequent's Avatar
 
City: Brisbane
Vessel Name: Insequent
Vessel Model: Ocean Alexander 50 Mk I
Join Date: Mar 2012
Posts: 4,262
Detroits are generally loud, but apparently can be quietened a bit by people in the know. Some of it comes from induction (air intake) which I guess is where part of the focus would be.

However, I gather that the the 4-53 is noisier than most of the other models. I recall a guy with them in a Hatteras LRC. He has to wear earmuffs when at the helm. That would cross a red line for me. Throaty sounds are fine, but going deaf from industrial noise is not OK in this day and age.
__________________
Brian
Insequent is offline   Reply With Quote
Old 05-24-2022, 10:18 PM   #6
Guru
 
tiltrider1's Avatar
 
City: Seattle
Vessel Name: AZZURRA
Vessel Model: Ocean Alexander 54
Join Date: Aug 2017
Posts: 4,308
4-53 came in several different HP configurations. At 140hp. It is an awesome long life engine. At 260hp it is an awesome short life engine.
tiltrider1 is online now   Reply With Quote
Old 05-24-2022, 10:45 PM   #7
Guru
 
Ken E.'s Avatar
 
City: Bellingham WA
Vessel Name: Hatt Trick
Vessel Model: 45' Hatteras Convertible
Join Date: Nov 2016
Posts: 1,973
Mechanics who really know 2-cycle Detroits are getting harder to find. My shop won't work on them anymore after their specialist retired. Parts are available but check out service availability in your area.
__________________
Ken on Hatt Trick
Ken E. is online now   Reply With Quote
Old 05-25-2022, 01:10 AM   #8
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,187
Quote:
Originally Posted by Ken E. View Post
Mechanics who really know 2-cycle Detroits are getting harder to find. My shop won't work on them anymore after their specialist retired. Parts are available but check out service availability in your area.
A lot of mechanics now don’t know what to do if they can’t plug a computer into the engine…
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
Comodave is offline   Reply With Quote
Old 05-25-2022, 02:14 AM   #9
Guru
 
magna 6882's Avatar
 
City: Burien
Vessel Name: Intrepid
Vessel Model: North Pacific/ NP-45 Hull 10
Join Date: Apr 2020
Posts: 684
I would ask a couple local shops about service. I last worked with them in the early 80s. They were good engines but leaked at the end plates and airbox covers. Really touchy about timing. they had a mechanical centrifugal governor and you needed about 5 special tools that were machined pins that were used to set injector timing. Called setting the rack i would spend about a day getting it perfect and they would really runout good. If you have a shop about running the rack and they just give dumb looks your in trouble. They didnt like to lug. That was the cause of most of the oil leaks. The rule for the driver was to run it floored. That moved a lot more air helping keep the air boxes pressurized around the cylinder liners.
magna 6882 is offline   Reply With Quote
Old 05-26-2022, 02:39 AM   #10
Guru
 
Lepke's Avatar
 
City: Between Oregon and Alaska
Vessel Name: Charlie Harper
Vessel Model: Wheeler Shipyard 83'
Join Date: Jun 2016
Posts: 3,023
Detroit 2 cycles are some of the most reliable marine engines. Much simpler than anything built today.

There's a bunch of places that sell engine kits. Check the internet. Rebuild parts are available world wide. ebay has parts and rebuild kits. Some people buy and disassemble engines to sell the parts.
I ran 6v53s in Vietnam. They held up well for having kids run them at full throttle all the time.
Detroits don't have to leak. It depends on the mechanic. Properly installed seals and gaskets don't leak. But the engines do put out an oily mist when not configured right. Buy a service manual, usually found on ebay, and be your own best mechanic.
Lepke is offline   Reply With Quote
Old 06-02-2022, 05:39 PM   #11
Member
 
City: Ocean View, HI
Join Date: May 2022
Posts: 11
Thank you everyone for all the information. The knowledge on this forum never ceases to amaze me. If/when I get more details I might have some follow up questions, but the information herein has been very helpful
Kirkos is offline   Reply With Quote
Old 06-02-2022, 08:22 PM   #12
Guru
 
Nomad Willy's Avatar
 
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
Duwam

I was aboard Duwam in about 2010.

The skipper was a wiley old man like me now. Had been a fisherman for many decades. I was amazed when I looked down the stairs and saw how incredibility deep this boat was. Duwam was designed by Hand (William I think) and powered by a 4-53 GM diesel. I heard nothing but positive re the 4-53. I think he was 73 then. IMO the three cylinder 53 engine would probably have been plenty of power.
Attached Thumbnails
BC747B74-ACD4-49E0-AA49-60B40CAA15D7.jpg  
__________________
Eric

North Western Washington State USA
Nomad Willy is offline   Reply With Quote
Old 06-06-2022, 12:57 PM   #13
Veteran Member
 
City: California Delta
Vessel Name: Cady Girl
Vessel Model: Californian, Seaswirl, Brig, all others sold.
Join Date: Jan 2014
Posts: 58
Yes finding an experienced technician is the key. I would imagine in HI there is someone who can help you. If not, fly someone in from the Pacific NW. You do that - and your oil leaks are gone.
DD's run great. If you want quiet in a boat it's just cubic dollars and you are there. Even DD's. Someday in retirement that might be a good project for me to tackle.
dwiggl is offline   Reply With Quote
Old 06-06-2022, 01:53 PM   #14
Guru
 
City: Seattle
Join Date: Jun 2012
Posts: 3,312
Quote:
Originally Posted by dwiggl View Post
... fly someone in from the Pacific NW. You do that - and your oil leaks are gone.
I found that eliminating the oil leaks on my 6-71s was rather simple and the new gaskets were affordable. Regarding to rebuilding, a guy with a 50 year old 4-53 may not have the budget to fly in a tech. For the same cost however, he could buy an old but excellent service manual, join boatdiesel.com for $25, and purchase an entire in-frame rebuild kit. Then either do it himself or with a local mechanic as a guide.
Mako is offline   Reply With Quote
Old 06-06-2022, 07:28 PM   #15
Senior Member
 
Captain DJ's Avatar
 
City: Elgin
Vessel Name: m/v "Ramble On"
Vessel Model: Cheoy Lee 34
Join Date: May 2016
Posts: 121
I had twin 4-53's of approx 1972 heritage in my 1969 GB-42-125. It originally had Daytona's when Robert & Mildred Newton (founder of American Marine Ltd., now Grand Banks Ltd.) first owned her, but somewhere during the second owner, that guy knew Daytona Marine Diesel DME-6 was discontinued around 1974+/-. So he did NOT want motors he could not get parts for, so he had 4-53's with the smallest injectors M-10, I believe, rated at 100 hp continuous duty, some books stated 120 hp.
These engines were phenomenal. Absolutely, hands down, better in my opinion than Ford Lehmans. These were not too loud, no hearing protection for me outside of the engine room. Loved the sounds from the FB. Easiest to maintain and could get my GB 42 classic to 7.5 knots (on flat water) at 1.15/gallons/hour per engine as verified from 40 gallon and 40-inch high day tank with sight gauge visible from aft stateroom. So it was way more accurate than the four flow sensors I have on my smaller vessel with FL that often registers twice to three times that consumption.
Boy I have wished many, many times that I could have those DD 4-53's over my FL 120's (E-Con-O Power).
Captain DJ is offline   Reply With Quote
Old 06-19-2022, 07:57 AM   #16
Senior Member
 
Lostsailor13's Avatar
 
City: North
Vessel Name: Broadbill
Vessel Model: Willard 36
Join Date: Oct 2020
Posts: 439
I have the 453 in my Willard with 2400 original hours,runs great,starts every time,very reliable,sounds great when I run her hard,seems that anyone that has had them absolutely love them,wish it was the 353,but this engine grew on me,so easy to work on,parts are everywhere and wouldn’t even hesitate to get another,even if I ever repowered it would be the 353
Lostsailor13 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 04:31 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012