 |
11-17-2014, 06:35 AM
|
#1
|
Member
City: osprey, fl
Vessel Model: 1983 Bestway Labelle
Join Date: Oct 2014
Posts: 9
|
82 Bestway Labelle
Volva Penta TAMD40A parts: I had posted before that we were in the process of buying a 1982 Bestway Labelle. We just had the survey done. It will need some cosmetics, window replacements, they are somewhat clouded for our use etc. Otherwise it is a solid boat. However in the near future, it will need some cooling system issues dealt with: one heat exchanger, some metal hoses and the 4 inch exhaust hose. In looking for parts, I found that they did not seem available, at least where I was looking, any advice? are there other volva pentas that have interchangeable parts..
|
|
|
11-17-2014, 06:53 AM
|
#2
|
Guru
City: Sarasota,FL/Thomasville,GA
Vessel Name: Steppin Stone IV
Vessel Model: Marine Trader Kelly Trawler 46
Join Date: Jul 2013
Posts: 1,815
|
Drasylum welcome neighbor
keep a eye out on ebay especially if it something you do not need right away
|
|
|
11-17-2014, 12:24 PM
|
#3
|
Guru
City: St. Lucie VILLAGE -NOT- Port St. Lucie!!!!!
Vessel Model: 15' Hobie Power Skiff w/90hp Yamaha-owned 28 years. Also a 2001 Bayliner 3788 that I took in trade
Join Date: Sep 2013
Posts: 525
|
You must have missed all the threads about Volvos? Parts, or lack thereof are the main issue against them. And IF you can find them, they're very expensive. It's all "supply and demand" isn't it?
|
|
|
11-17-2014, 01:55 PM
|
#4
|
Member
City: osprey, fl
Vessel Model: 1983 Bestway Labelle
Join Date: Oct 2014
Posts: 9
|
I have been reading the volvo posts. I have found the parts I need and I can substitute some parts for volvos, I really appreciate the feedback I have gotten from everybody, we are newbies to the trawler world and all the experience that abounds here has been very educating..
|
|
|
11-18-2014, 12:21 PM
|
#5
|
Guru
City: Cypress Landing Marina (NC)
Vessel Name: Heron (2)
Vessel Model: '88 Cape Dory 28 Flybridge #115
Join Date: Nov 2014
Posts: 1,305
|
Newb here too...The Cape Dory I'm buying has a TAMD41P. Luckily I found a good supply of spares on the boat and the Cooling system was just cleaned out.
I had some concern over spares too, but it looks like I'm covered for awhile. Will still be looking for sources. Current (soon to be Ex) ordered all his stuff on-line. I'll go through the boxes and see where the stuff came from..
Nice that the boat came with a full installation manual from the re-powering along with parts and service books..
__________________
Steve
|
|
|
11-18-2014, 03:31 PM
|
#6
|
Guru
Join Date: Dec 2007
Posts: 4,015
|
As a VOLVO TMD40 owner(2) for fourteen years, please accept my condolences. Volvo does not support products that are out of production. Searching for parts can become your life's work.
|
|
|
11-19-2014, 07:01 PM
|
#7
|
Guru
City: Thibodaux, Louisiana
Vessel Name: Gumbo
Vessel Model: 2003 Monk 36
Join Date: Oct 2007
Posts: 3,882
|
You might check with P&D Marine, Inc. - About Us
in Orange Beach Alabama. They are Volvo marine dealers. When I had a Camano with a volvo engine I dealt with them.
|
|
|
11-20-2014, 08:02 PM
|
#8
|
Senior Member
City: Seattle
Vessel Name: Nordvind
Vessel Model: Nova Heritage 36
Join Date: Oct 2014
Posts: 123
|
Coastal Marine Engine in Seattle. They have all the parts. The Native American fishing fleet runs on old volvos here.
Coastal Marine
__________________
Nordvind | 1987 36' Nova | Volvo TMD41A
|
|
|
 |
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -5. The time now is 07:35 AM.