Time to spruce up a 1999 Ocean Alexander 426 Classico

[cfm]

Originally Posted by cfm

Attachment 128177

Attachment 128178

the tracks in my previous photo are ror rollers with a groove in them top and bottom. Easy in and out, I put a couple appropriate snug height 12" long blocks against the bulkhead and going to aft. removed the screws and from the
end to were the door opens all the way pried the bottom track out 1/2 inch. from the closing end pried it away from the closing upright about an 3/4" and moved the door to the middle of the track. Pulled the bottom of the door aft and wala/// she slide out onto the block 6 inches and the top tipped right out.
No I need to find grooved nylon rollers with the carriers for top and bottom.
photos to follow.

[cdb]

OA has the rollers. My door only has them on the bottom. Had to do some very minor wood working with a sharp chisel to make them fit. Bought two sets just in case.
By the way, I have tons of brand-new window white rubber glazing as well as the white rubber screw track covers from OA if you are interested I decided to completely replace my windows so I never used it.

[cfm]

I didn’t see any rollers with grooves in the to fit over the center raised rib on the AO website

[cfm]

Originally Posted by cdb

OA has the rollers. My door only has them on the bottom. Had to do some very minor wood working with a sharp chisel to make them fit. Bought two sets just in case.
By the way, I have tons of brand-new window white rubber glazing as well as the white rubber screw track covers from OA if you are interested I decided to completely replace my windows so I never used it.

I didn’t see any nylon rollers with grooves to fit over the center raised rail in the AO website

[cfm]

Got rotated. Not loaded from computer but phone