Rocna Vulcan on a mainship
- Thread starter Cartouche
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
- Joined
- Jan 9, 2014
- Messages
- 4,181
- Location
- USA
- Vessel Name
- N/A
- Vessel Make
- 1999 Mainship 350 Trawler
I have a Rocna Vulcan 20 kg with 5/16 G40 chain on a Mainship 350 (350/390). No issues with installation. We use a Mantus swivel. This leaves only a few links between the swivel and windlass.
No modifications necessary, though I would like the cheeks of the bow roller to be longer. The anchor does rock a little, but not bad with enough tension.
No modifications necessary, though I would like the cheeks of the bow roller to be longer. The anchor does rock a little, but not bad with enough tension.
OP
OP
Cartouche
Senior Member
- Joined
- Dec 17, 2017
- Messages
- 470
- Location
- Canada
- Vessel Name
- On The EdJ
- Vessel Make
- Former 390 owner now Sundancer 380
Many thanks that will be the same setup we will end up with, our boat is covered and I just did not want to buy unless I knew it was going to fit. Once again many thanks for letting me know.
