|
|
06-18-2016, 10:09 AM
|
#1
|
Guru
City: San Diego
Vessel Model: Helmsman 4304
Join Date: May 2016
Posts: 2,005
|
Marking Anchor Rode with Paint
I know there are various ways to do this, but I prefer painting it, using the red - yellow - blue method. I anchor a lot, 2-3 times per month during the summer, so I get about 1-2 years before the paint fades.
The dealer did it the last time for me, so I am not sure what they used.
Any ideas on a robust paint that will hold up longer?
Thanks in advance.
|
|
|
06-18-2016, 11:15 AM
|
#2
|
Guru
City: Seabrook, Texas
Vessel Name: Small World
Vessel Model: Defever 50
Join Date: Sep 2014
Posts: 611
|
Good timing for me for this question. I'm getting ready to paint my chain. I'm planning to use Rustoleum, but I don't know if that's the best choice.
|
|
|
06-18-2016, 11:30 AM
|
#3
|
Guru
City: Tri Cities, WA
Join Date: Nov 2012
Posts: 4,406
|
I've always used Rustoleum and had good luck with it.
One thing I did when I last painted mine was to paint an all white section about 6' long starting at a point where the anchor is still about 2' down in the water and ending when the anchor is about 3' from the pulpit.
I operate the windlass from the upper helm and that lets me know when I'm real close to the anchor getting to the pulpit so I can slow down the windlass.
__________________
Mike and Tina
1981 Boston Whaler 13'
|
|
|
06-18-2016, 12:01 PM
|
#4
|
Guru
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
|
Quote:
Originally Posted by Fletcher500
I know there are various ways to do this, but I prefer painting it, using the red - yellow - blue method. I anchor a lot, 2-3 times per month during the summer, so I get about 1-2 years before the paint fades.
|
Slight thread drift, but can you briefly describe the red-yellow-blue method? My chain was marked by the PO with colored ties, but they aren't easy to see and The coding is far from intuitive for me.
|
|
|
06-18-2016, 04:15 PM
|
#5
|
TF Site Team
City: Jacksonville
Join Date: Nov 2008
Posts: 11,683
|
Rustoluem has worked well for also.
We have 300' of chain and use 3 colors. The first and last are at 30' from the ends. All the other markers are at 40'. When we reverse the chain, to even out the wear, the starting point is the same from either end.
|
|
|
06-18-2016, 05:26 PM
|
#6
|
Moderator Emeritus
City: Chicago, IL
Vessel Name: Bay Pelican
Vessel Model: Krogen 42
Join Date: Oct 2007
Posts: 2,993
|
I use five colors:
Red. 25, 125, 225
White 50, 150, 250
Blue 75, 175, 275
Yellow 100
Green 200
Yellow alternating with green, first 10 feet, last 10 feet
Paint is cheapest spray can I can buy
Paint every year when I drop anchor chain in boat yard to wash.
__________________
Marty
|
|
|
06-19-2016, 06:56 AM
|
#8
|
Guru
Join Date: Oct 2007
Posts: 22,553
|
As your chain is galvanized you will need to prime it with Rustoleun aluminum water based primer.
Let it dry for a couple of days and then paint as desired,oil or latex , OK.
With out the prime galvanized stinks at holding paint.
|
|
|
06-19-2016, 07:31 AM
|
#9
|
Guru
City: Groton, CT
Vessel Name: Datenight
Vessel Model: North Pacific 45
Join Date: Jan 2008
Posts: 1,106
|
Rustoleum. Red, white and blue every 30 feet. Red 30, white 60, blue 90 repeat. First painted three years ago time for a touch up. I did not use primer on the galvinized chain and it seems to hold up well.
For the beating it takes going in and out of the locker I don't think it matters what brand paint you use.
Rob
__________________
North Pacific 45
|
|
|
06-19-2016, 08:56 AM
|
#10
|
Guru
City: Miami Florida
Vessel Name: Possum
Vessel Model: Ellis 28
Join Date: Aug 2011
Posts: 5,308
|
You guys do it the hard way. My chain links are 1-1/4 inches long. I just count the links as they go out and do the math. 960 links equals 100 feet. Simple.
gotcha
__________________
Parks Masterson
Retired from Hopkins-Carter Marine Supply
|
|
|
06-19-2016, 09:06 AM
|
#11
|
Guru
City: Stuart FL
Vessel Name: Lucky Lucky
Vessel Model: Pacific Mariner 65
Join Date: Aug 2013
Posts: 2,760
|
Quote:
Originally Posted by HopCar
You guys do it the hard way. My chain links are 1-1/4 inches long. I just count the links as they go out and do the math. 960 links equals 100 feet. Simple.
gotcha
|
How do you compensate for the chain to anchor shackle??
__________________
Howard
Lucky Lucky
Stuart, FL
|
|
|
06-19-2016, 10:01 AM
|
#12
|
Guru
City: San Diego
Vessel Model: Helmsman 4304
Join Date: May 2016
Posts: 2,005
|
Thanks for the replies, and the old links to past threads, great stuff.
Regarding those imtra links, so they stayed in place after years of anchor pulling? Can you see them in low light?
|
|
|
06-19-2016, 10:25 AM
|
#13
|
Guru
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
|
Those look nice but seems expensive. A spray can of Rustoleum is about $4.00. $12 for Red, white, blue. $16 if you get fancy and add yellow.
I have never sprayed chain. Any tips for those of us that don't haul our boats and would need to do it at the dock?
|
|
|
06-19-2016, 11:28 AM
|
#14
|
Senior Member
City: Ventura
Vessel Name: Tatanka
Vessel Model: 32' Nordic Tug
Join Date: Aug 2014
Posts: 240
|
I used marking paint to paint my chain. I'm a little over a year and it's still going strong.
Although next time I'll probably use Rustoleum.
I mark my rode in 50' increments.
Out here in California, I never let out less than 50'. Ever.
One hash mark at 50', 2 hash marks at 100', 3 at 150', 4 hash marks at 200'.
|
|
|
06-19-2016, 12:55 PM
|
#15
|
Guru
City: San Diego
Vessel Name: Circuit Breaker
Vessel Model: 2021..22' Duffy Cuddy cabin
Join Date: Oct 2007
Posts: 6,691
|
I use Rustoleum Red, White & Blue every 50 feet. (ie Red at 50', white at 100' & blue at 150'. This works well in my area since I never anchor in 150'+
__________________
Done with diesel power boats! Have fallen in love with all electric!
|
|
|
06-19-2016, 02:34 PM
|
#16
|
Guru
City: Miami Florida
Vessel Name: Possum
Vessel Model: Ellis 28
Join Date: Aug 2011
Posts: 5,308
|
Howard, I've been two inches off all these years! Thanks for pointing that out. I won't make that mistake again.
__________________
Parks Masterson
Retired from Hopkins-Carter Marine Supply
|
|
|
06-19-2016, 02:40 PM
|
#17
|
Guru
City: Full Time Cruising East Coast
Vessel Name: Meridian
Vessel Model: Krogen-42
Join Date: Aug 2011
Posts: 1,014
|
Put the section of chain in a cardboard box for painting.
Sent from my iPhone using Trawler Forum
__________________
-------------------------
Terry
Meridian
KK-42097
|
|
|
06-19-2016, 03:20 PM
|
#18
|
Guru
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
|
Quote:
Originally Posted by meridian
Put the section of chain in a cardboard box for painting.
Sent from my iPhone using Trawler Forum
|
Thank you! Great idea.
Do you spray the chain, then flip it and try and spray the other side?
|
|
|
06-19-2016, 03:21 PM
|
#19
|
Guru
City: Full Time Cruising East Coast
Vessel Name: Meridian
Vessel Model: Krogen-42
Join Date: Aug 2011
Posts: 1,014
|
That's how I do it
__________________
-------------------------
Terry
Meridian
KK-42097
|
|
|
06-19-2016, 03:22 PM
|
#20
|
Guru
City: New England and Canada to Florida
Vessel Name: Tadhana
Vessel Model: Helmsman 38 Pilothouse
Join Date: Jul 2011
Posts: 596
|
I have tried a lot of things over the years. WE cruise full time and anchor frequently. I used paint, it fades, and wire ties they break off, the imtra things are ridiculously expensive, hard to see and they fall out. A few years ago someone suggested weaving a short length of yellow poly prpelyne rope through the chain. It is easy to see even in low light, goes through the windlass easy and is easy to move when you end for end the chain. First one is at 12 feet that means my anchor is 6 feet below the water. close to the bottom and as soon as i make sternway it gets on the bottom and the chain is laid out away from it. the next marker is at 75 feet, ~5:1 ratio in 10 feet of water which is common here on the bay. the next is two short lengths at 100 feet, that is 5:1 in 20 feet of water, then three short ones at 125, 5:1 in 25'. Then back to one long piece at 150, two short at 175, and the chain splice is at 200.
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|