Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-03-2019, 12:03 PM   #1
Guru
 
City: Qualicum Beach, Vancouver Island
Vessel Name: Capricorn
Vessel Model: Mariner 30 - Sedan Cruiser 1969
Join Date: Feb 2019
Posts: 2,019
Chain counter

When I first heard about a chain counter for my rode, it sounded like a great idea but my refit guy, who stands to make money from me if he installs it, doesn't recommend one.

My boat has been gutted and I noticed in an electrical schematic that it has been included, he doesn't always remember the discussions we've had, which is understandable as there has been many.

What is your experience with a chain counter, especially when my braided nylon line kicks in after 150 feet of chain. The is a gross generalization but the average anchor depth in Coastal BC waters is 40 feet.
rsn48 is offline   Reply With Quote
Old 06-03-2019, 12:45 PM   #2
Guru
 
Join Date: Dec 2018
Posts: 565
I had one installed on my all-chain anchor setup. It does simplify single handed anchoring, IMHO.
Spinner is offline   Reply With Quote
Old 06-03-2019, 02:22 PM   #3
Guru
 
Simi 60's Avatar
 
City: Queensland
Vessel Model: Milkraft 60 converted timber prawn trawler
Join Date: Jul 2016
Posts: 5,482
As simple as it gets, rarely do we need to count higher than 2
We have a couple of feet of yellow fed through the chain at 5 ft as a warning anchor is nearly up and then every 70ft or so after that.

Last a couple of years of daily anchoring, no problems going through the chainwheel

We have a maxwell chain counter still sitting in its box in the spares locker, couldn't be bothered installing it, one more thing to fail.




Simi 60 is offline   Reply With Quote
Old 06-03-2019, 02:26 PM   #4
Guru
 
ranger58sb's Avatar
 
City: Annapolis
Vessel Name: Ranger
Vessel Model: 58' Sedan Bridge
Join Date: Aug 2013
Posts: 7,088
Our chain counter works like a champ... on our leading chain.

When our mixed rode switches to rope, not so much... but we have that marked in 25' increments, so it's easily solved.

If we move somewhere and go back to an all-chain rode, the counter will be even more useful.

-Chris
__________________
Chesapeake Bay, USA
ranger58sb is offline   Reply With Quote
Old 06-03-2019, 03:11 PM   #5
Guru
 
RickyD's Avatar
 
City: Long Beach, CA
Vessel Name: Aquarius
Vessel Model: Californian 55 CPMY
Join Date: May 2018
Posts: 725
I have a chain counter and love it. I have an all chain rode so it is fairly accurate. Control from the fly bridge is great. I anchor in depths between 35 feet to well over 100. We have about 500 feet of chain in the locker. I'm so glad I have it.
__________________
Aquarius 1991 Californian 55 CPMY Long Beach CA
RickyD is offline   Reply With Quote
Old 06-03-2019, 05:12 PM   #6
Guru
 
MYTraveler's Avatar
 
City: West Coast
Join Date: Apr 2014
Posts: 1,790
I generally favor technological solutions to problems, as evidenced by a more than normal compliment of gizmos and gadgets on my boat. But, a chain counter is not something I have ever wished for. My chain is marked and that works just fine.
MYTraveler is offline   Reply With Quote
Old 06-03-2019, 05:50 PM   #7
Guru
 
Bigsfish's Avatar
 
City: Miami River
Vessel Name: Gotcha
Vessel Model: Grand Banks. Heritage. 54
Join Date: Aug 2016
Posts: 2,988
Last two boat with all chain ride had chain counters, they are great and easy to know exactly how much rode you have out. AFAIK they all work on a magnet attached to the chain wheel, if you have the correct diameter it’s foolproof even for an idiot like me.
Bigsfish is offline   Reply With Quote
Old 06-03-2019, 08:27 PM   #8
Guru
 
twistedtree's Avatar
 
City: Vermont
Join Date: Jan 2013
Posts: 10,093
We had one on our last boat and I really liked it. You can program in how much ride you want to deploy, then push a button and out it goes while you maneuver the boat. Without that feature, you need to have one hand on the control to pay out chain. The auto feature frees up you other hand. I just set mine to a large value rather than adjusting it each time, and I’d just keep an eye on it and stop it 10-20’ short of the bottom. Then I’d manually deploy until touch down, at which points I’d mark the spot on my anchor watches. Then I’d auto pay out however much scope I wanted. On retrieval, you can again auto retrieve and it will stop when the anchor is 6’ away. All of it just makes the process easier. It’s not necessary by any means, but definitely makes life easier
__________________
MVTanglewood.com
twistedtree is online now   Reply With Quote
Old 06-03-2019, 08:32 PM   #9
Guru
 
Bigsfish's Avatar
 
City: Miami River
Vessel Name: Gotcha
Vessel Model: Grand Banks. Heritage. 54
Join Date: Aug 2016
Posts: 2,988
TT

It’s not necessary until you use it a lot.
Bigsfish is offline   Reply With Quote
Old 06-03-2019, 08:51 PM   #10
Guru
 
Alaskan Sea-Duction's Avatar
 
City: Inside Passage Summer/Columbia River Winter
Vessel Name: Alaskan Sea-Duction
Vessel Model: 1988 M/Y Camargue YachtFisher
Join Date: Jul 2012
Posts: 8,050
I use the most simple cheapest way. Using Florescent spray paint:

1. Every 20 feet I paint the chain white.
2. Every 100 feet I paint the chain Orange
3. Two Hundred feet: Orange-Black-Orange
4. Three Hundred feet: Orange-Black-Orange-Black-Orange


Used this for the last 5 years, works great. You do have to re-spray annually.
Attached Thumbnails
IMG_3743.jpg  
Alaskan Sea-Duction is offline   Reply With Quote
Old 06-03-2019, 09:47 PM   #11
Guru
 
Simi 60's Avatar
 
City: Queensland
Vessel Model: Milkraft 60 converted timber prawn trawler
Join Date: Jul 2016
Posts: 5,482
Quote:
Originally Posted by Alaskan Sea-Duction View Post
I use the most simple cheapest way. Using Florescent spray paint:

.
No where near as simple and cheap as the coloured rope method above



Quote:
Used this for the last 5 years, works great. You do have to re-spray annually
If you don't anchor much it possibly does.
If you cruise full time and only anchor like we do its gone in a matter of weeks.
Simi 60 is offline   Reply With Quote
Old 06-03-2019, 10:33 PM   #12
Moderator Emeritus
 
ksanders's Avatar
 
City: SEWARD ALASKA
Vessel Name: DOS PECES
Vessel Model: BAYLINER 4788
Join Date: Feb 2011
Posts: 6,267
Quote:
Originally Posted by Alaskan Sea-Duction View Post
I use the most simple cheapest way. Using Florescent spray paint:

1. Every 20 feet I paint the chain white.
2. Every 100 feet I paint the chain Orange
3. Two Hundred feet: Orange-Black-Orange
4. Three Hundred feet: Orange-Black-Orange-Black-Orange


Used this for the last 5 years, works great. You do have to re-spray annually.
Thats a LOT of painting.

I paint the all chain rode every 100’ using the old telecom color code

Blue, Orange, green, Brown, Slate (I used white for this). Then Red for the the last 50’
__________________
Kevin Sanders
Bayliner 4788 Dos Peces
Seward, Alaska - La Paz, Baja California Sur
https://maps.findmespot.com/s/XLJZ#history/assets
ksanders is offline   Reply With Quote
Old 06-04-2019, 04:25 AM   #13
TF Site Team
 
City: Ex-Brisbane, (Australia), now Bribie Island, Qld
Vessel Name: Now boatless - sold 6/2018
Vessel Model: Had a Clipper (CHB) 34
Join Date: Jun 2008
Posts: 10,101
This discussion always gives me a laugh. We have the types who have a chain-counter, and those that don't. What we don't have is many who have once had one, but now don't have one but are not bothered by this lack. On the other hand, we have those like me, who even though, compared to most, my boat electronics and other labour-saving bells and whistles and gizmos are spartan to say the least, (eg not even an A/P), I still look back on when I installed a fairly cheap but reliable chain-counter as one of the best things I ever did.

But if messing around tying coloured bits of this and that, or painting sections different colours, or using different coloured lengths of rope floats your boat - fine..! You just keep missin' out on the best you-beaut boat anchoring device ever invented for as long as y'all like. But Simi, as a dinky dye do it yourself Aussie, to have a new one still in it's box, and not installed...I'm left speechless, really I am. Although if you do anchor in places so deep you always have some nylon (duly coloured) out, then maybe, just maybe, I can live with that.
__________________
Pete
Peter B is offline   Reply With Quote
Old 06-04-2019, 04:54 AM   #14
TF Site Team
 
Insequent's Avatar
 
City: Brisbane
Vessel Name: Insequent
Vessel Model: Ocean Alexander 50 Mk I
Join Date: Mar 2012
Posts: 4,262
I have had a chain counter for a few years, initially the CruzPro but now the Muir-supplied one with the new windlass. I would not be without it.

I did get one last season out of the Ideal windlass and its BBB chain. The chain had enough surface rust to stain the foredeck so I treated it with rust converter Then I read the rust converter instructions, which said for best results paint afterwards!

So, no problem, just use different colour paint in 10m intervals. As in the pic.
The code is based on what I understand is the old British Navy one: Rub Your Balls With Grease. I can only surmise that young seamen received a 'reminder' that they would not forget in a hurry if perchance they got it wrong......
Attached Thumbnails
RYBWG sml.jpg  
__________________
Brian
Insequent is offline   Reply With Quote
Old 06-04-2019, 09:49 AM   #15
Guru
 
dhays's Avatar
 
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
A chain counter would be nice. However, I’m too lazy to run wire. I painted my chain a couple years ago and it i has worked fine. Granted, it will need to be repainted before long. I also am not satisfied with my paint scheme and if I repaint I will change it.

I’m intrigued with the idea of using a poly line thread through the chain. It would be cheap, easy, and effective. My only concern would be the amount of mud that it could pick up. Lot of anchorages around hear are pretty muddy and usually the chain is lying on the bottom in the mud.
__________________
Regards,

Dave
SPOT page
dhays is offline   Reply With Quote
Old 06-04-2019, 10:32 AM   #16
TF Site Team
 
koliver's Avatar
 
City: Saltspring Island
Vessel Name: Retreat
Vessel Model: C&L 44
Join Date: Nov 2007
Posts: 5,663
The watch that I always wear has a stopwatch built in.
My windlass deploys chain at ~1'/sec, 120' takes 2 min to let out.
Simple.
__________________
Keith
koliver is offline   Reply With Quote
Old 06-04-2019, 01:01 PM   #17
Guru
 
City: Qualicum Beach, Vancouver Island
Vessel Name: Capricorn
Vessel Model: Mariner 30 - Sedan Cruiser 1969
Join Date: Feb 2019
Posts: 2,019
So I went out on my boat and "Rubbed My Balls With Grease" before I dropped the anchor and I still didn't know how much rode I let out. [For those that don't read prior posts, you're going to have to work on this one]
rsn48 is offline   Reply With Quote
Old 06-04-2019, 02:39 PM   #18
Guru
 
Aquabelle's Avatar
 
City: East Coast, Australia
Join Date: Jun 2012
Posts: 935
Like TT, I have a fully auto windlass controller with chain counter. It is wireless and also contols bow thruster and anchor washdown pump. Worn around neck on lanyard while at bow, it is invaluable when picking up a mooring. Couldn't live without it now.
Aquabelle is offline   Reply With Quote
Old 06-04-2019, 02:49 PM   #19
Guru
 
Simi 60's Avatar
 
City: Queensland
Vessel Model: Milkraft 60 converted timber prawn trawler
Join Date: Jul 2016
Posts: 5,482
Quote:
Originally Posted by dhays View Post
.

I’m intrigued with the idea of using a poly line thread through the chain. It would be cheap, easy, and effective. My only concern would be the amount of mud that it could pick up. Lot of anchorages around hear are pretty muddy and usually the chain is lying on the bottom in the mud.
It picks up a lot less mud than the considerable amount of chain you have laying in it.
You hose that off as it comes up right , the small bit of rope gets done at the same time.

Don't melt the rope ends, over time it frays out and makes a nice visible flag easily seen from our helm position
Simi 60 is offline   Reply With Quote
Old 06-04-2019, 03:00 PM   #20
Guru
 
Simi 60's Avatar
 
City: Queensland
Vessel Model: Milkraft 60 converted timber prawn trawler
Join Date: Jul 2016
Posts: 5,482
Quote:
Originally Posted by Peter B View Post
.

But if messing around tying coloured bits of this and that, or painting sections different colours, or using different coloured lengths of rope floats your boat - fine..! You just keep missin' out on the best you-beaut boat anchoring device ever invented for as long as y'all like. But Simi, as a dinky dye do it yourself Aussie, to have a new one still in it's box, and not installed...I'm left speechless, really I am. Although if you do anchor in places so deep you always have some nylon (duly coloured) out, then maybe, just maybe, I can live with that.

Rope was the logical choice for me.

Tying bits of rope takes 5 minutes once every two years of daily anchoring usage.
A lifetime supply of bits of rope costs $5 at the big green hardware shed.
Easily fixed in remote locations with no need for an electrician or trades person of any sort to do it.

Compare that to the considerable cost for a chain counter
Purchase of device, removal of windlass, drilling holes, mixing epoxy , wiring runs from foredeck to wheelhouse , re fitting windlass, the dollars and time add up.

Our counter sells for $744 here
Just another of the expensive "treasures" we came across as we explore the many hidyholes onboard.
If only the previous owner had left cash or gold instead
https://www.keoghsmarine.com.au/Anch...lasses-p102944
Simi 60 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 12:21 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012