The Brockerts
Senior Member
- Joined
- Oct 17, 2014
- Messages
- 246
- Location
- USA
- Vessel Name
- Moonstruck
- Vessel Make
- 1990 Californian/Carver 48 MY
My installer, installed a Multiplus 12/3000/120-50 on a 20amp breaker. So now I can only run 20amps on a 50amp line. The line coming in is rated at 50amps. so the question is can I change out the 20amp to a 30amp or 50amp?. As I understand this unit, it can supply 30amp on inverter mode but should pass thru 50 amps when it's plugged into shore power.
The Brockerts
The Brockerts