Raymarine C 80 Problem

[ctjstr]

I have an old Raymarine C80 Plotter. Its worked fine in the time we've owned Satisfaction.

I'm gradually updating, adding some things, changing others. One thing I've done is switch my plotter/radar/sonar to Garmin. But, decided to keep the C80 as a second plotter/backup. I had the work done at Breakwater in Tacoma. I moor there and like the folks. All is great with the swap, EXCEPT, I've picked up a periodic beeping alarm. Maybe every 30-45 seconds an alarm sound for several seconds and then stops. All else seems great, so logic tells me that something happened when we moved the C-80 over to the other side of the dash.

I can and will bug the guys down at breakwater, but curious if anyone has run into this and was there any quick fix? I'm looked and so far, nothing.

thanks in advance.

toni

 

[boomerang]

It could be several things causing an alarm to sound but it's likely somebody inadvertently pressed the MOB button and it's alarm is sounding. Hover the cursor over the target to clear it.