Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-14-2020, 08:30 AM   #41
Newbie
 
City: Westbrook, CT
Vessel Name: Alemi
Vessel Model: Four Winns 338 Vista Express
Join Date: May 2019
Posts: 3
rgano,
I'm pretty good at wiring. My question is more to do with the plumbing of the Gulper pump to integrate with the sump box with the internal pump removed.
kknelson57 is offline   Reply With Quote
Old 04-20-2020, 09:04 AM   #42
Senior Member
 
BrianSmith's Avatar
 
City: Wherever Smartini is
Vessel Name: Smartini
Vessel Model: 2002 Kristen 52' Flybridge Trawler
Join Date: Mar 2014
Posts: 487
Quote:
Originally Posted by kknelson57 View Post
rgano,
I'm pretty good at wiring. My question is more to do with the plumbing of the Gulper pump to integrate with the sump box with the internal pump removed.
If you get the Gulper pump/sump combo, then you're getting rid of the old sump box.

If you get the Gulper pump (Gray Water IC, I think), If you have a little space, you can use PVC to make a manifold. String together a bunch of T fittings, and run one of your drain hoses (sink, shower, AC condensate pan, etc.) hose into each one. The last one (make it the largest diameter T) goes into the Gulper.

https://www.pvcfittingsonline.com/pv...-1401-209.html
https://www.whalepumps.com/marine/pr...ndlyID=Grey-IC
BrianSmith is offline   Reply With Quote
Old 04-20-2020, 12:07 PM   #43
Guru
 
rgano's Avatar
 
City: Southport, FL near Panama City
Vessel Name: FROLIC
Vessel Model: Mainship 30 Pilot II since 2015. GB-42 1986-2015. Former Unlimited Tonnage Master
Join Date: Oct 2007
Posts: 4,984
Quote:
Originally Posted by BrianSmith View Post
If you get the Gulper pump/sump combo, then you're getting rid of the old sump box.

If you get the Gulper pump (Gray Water IC, I think), If you have a little space, you can use PVC to make a manifold. String together a bunch of T fittings, and run one of your drain hoses (sink, shower, AC condensate pan, etc.) hose into each one. The last one (make it the largest diameter T) goes into the Gulper.

https://www.pvcfittingsonline.com/pv...-1401-209.html
https://www.whalepumps.com/marine/pr...ndlyID=Grey-IC
It is not required to get rid of the old sump box, nor in some cases should it. The Whale sump/Gulper combo is way kewl, but I did not go that route. I did not do a manifold because the box had the condensate pan drain line from the ac unit. That periodic drain needs a triggering device to tell the Gulper to operate; so I left the Rule flipper switch in there to trigger the Gulper which has a suction tub just stuck into the bottom of the sump box.
__________________
Rich Gano
FROLIC (2005 MainShip 30 Pilot II)
Panama City area
rgano is offline   Reply With Quote
Old 01-08-2022, 11:10 AM   #44
Guru
 
rgano's Avatar
 
City: Southport, FL near Panama City
Vessel Name: FROLIC
Vessel Model: Mainship 30 Pilot II since 2015. GB-42 1986-2015. Former Unlimited Tonnage Master
Join Date: Oct 2007
Posts: 4,984
Here's my Whale pump powered through the float switch in the Attwood box sitting on top of the box.
Attached Thumbnails
Whale sump pump.jpg  
__________________
Rich Gano
FROLIC (2005 MainShip 30 Pilot II)
Panama City area
rgano is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 07:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012