HopCar
Guru
- Joined
- Aug 20, 2011
- Messages
- 5,310
- Vessel Name
- Possum
- Vessel Make
- Ellis 28
I think what you have is a 1" strainer. The pipe size you are measuring, 1-3/8", is very close to the OD of 1" pipe.
1-3/8" = 1.375"
1" pipe OD = 1.315
If the ID of your hose is 1-1/8" then you need a Groco FFC-1125.
This is an elbow with 1" male pipe thread on one end and is sized for 1-1/8" hose id on the other.
https://www.groco.net/products/fittings/pipe-to-hose-elbows/ffc-series-npt-full-flow
Check the ID of the hose, 1-1/8 sounds strange to me.
1-3/8" = 1.375"
1" pipe OD = 1.315
If the ID of your hose is 1-1/8" then you need a Groco FFC-1125.
This is an elbow with 1" male pipe thread on one end and is sized for 1-1/8" hose id on the other.
https://www.groco.net/products/fittings/pipe-to-hose-elbows/ffc-series-npt-full-flow
Check the ID of the hose, 1-1/8 sounds strange to me.