Need window knobs and locks

[dwiggl]

I have an '89 Carver.
The cabin sliders need new knobs and the plastic glue-on "catch locks" are rotten/broken from UV exposure. The knobs are soft rubber over metal to protect the glass when landlubber rams the window knob into the edge of the stationary glass. I was thinking of replacing the tracks also.
Got any ideas for a source? Thanks.

 

[rsn48]

Something like this?

https://ca.binnacle.com/Cabin-Hardw...210-Anti-Rattle-Window-Stop/product_info.html

 

[Comodave]

Have you tried Carver?

 

[C lectric]

Perko used to make these also. Don't know if they still do.

 

[Ohana Kai]

take a look at these, pretty close to stock

 

[Ohana Kai]

These are available on Amazon. I was looking to replace all of my knobs and these look pretty close to the stock ones. I would only use the inside knob and use the existing backing plate with a new Oring.


Prime-Line Products M 6099 Sliding Shower Door Pull Knobs, Diecast with Black Rubber Bumper, Chrome Finish


https://www.amazon.com/Prime-Line-P...ocphy=9031173&hvtargid=pla-275432996817&psc=1

 

[dwiggl]

That's a good start. Will reach out and see what they can do.
Thank You!

 

[brbayou1]

I am looking to also replace a missing rubber bumper window stop. Can't find anything specifically made as a replacement. Found these- may work with a sealant, flexible washer on reverse. Still researching...
https://www.amazon.com/dp/B07D1JTQT...olid=21P0THX6IWFDT&psc=1&ref_=lv_ov_lig_dp_it