Shoalwaters
Guru
- Joined
- Feb 24, 2008
- Messages
- 681
- Location
- St. Lucia, West Indies
- Vessel Name
- "Dragon Lady"
- Vessel Make
- DeFever 41
I want to drill blind holes to accept teak plugs and I can't source suitable drill bits. The pic shows a bit purchased in the UK many years ago and well past it's prime. Google is my friend, but I need to know the right search term. I don't want the combination drills that cut the screw-hole and the hole for the plug at the same time. Forstner bits are somewhat unwieldy when only drilling a hole 1/2" deep. Any suggestions would be appreciated.