Duvie
Senior Member
- Joined
- Nov 5, 2011
- Messages
- 341
I am having trouble identifying the correct wiper arm part number for the wipers on my Californian 34 LRC.
They are stamped Anco and the spline on the motor measures slightly over 1/2 inch at about .540 thousandths.
They are adjustable in length from about 10 to 14 inches.
There is a metal clip that holds them onto a spline and no set screw of any kind.
Anco makes a few models that look like these but none of the sites I can find give enough information to determine which one I need. The missing information is on the spline size and attachment method. Seems as though some are 1/4, 1/2 and 5/8 spline and some seem to have set screws which mine do not.
The motors are Bosh made in the USA but the model numbers are not legible.
They are stamped Anco and the spline on the motor measures slightly over 1/2 inch at about .540 thousandths.
They are adjustable in length from about 10 to 14 inches.
There is a metal clip that holds them onto a spline and no set screw of any kind.
Anco makes a few models that look like these but none of the sites I can find give enough information to determine which one I need. The missing information is on the spline size and attachment method. Seems as though some are 1/4, 1/2 and 5/8 spline and some seem to have set screws which mine do not.
The motors are Bosh made in the USA but the model numbers are not legible.