Duetto
Senior Member
- Joined
- Nov 18, 2016
- Messages
- 287
- Location
- United States
- Vessel Name
- GEM
- Vessel Make
- Mainship Pilot 34
hi all,
we have a flow 10k a/c unit. it is 3 seasons old. a week ago it was working but went to the boat today and it wasn't. specifically it appears that compressor is not working. the wall control "knows" it should be on because the fan is working on max, water flow is normal. normally when unit starts there is a click and then a buzz and cool air starts almost immediately. now after the click the compressor shakes and there is a clunk. also the compressor is warm rather than the normal hot.
any ideas what is the problem?
we have a flow 10k a/c unit. it is 3 seasons old. a week ago it was working but went to the boat today and it wasn't. specifically it appears that compressor is not working. the wall control "knows" it should be on because the fan is working on max, water flow is normal. normally when unit starts there is a click and then a buzz and cool air starts almost immediately. now after the click the compressor shakes and there is a clunk. also the compressor is warm rather than the normal hot.
any ideas what is the problem?