Yanmar 6LYA-STP

[lipets]

Want to do a flush I can exit the flush taking off the feed to the wet elbow.


But where can I start the flush loop, think after the raw water pump but that hose in there is really tight to get out and hook up


Where else can I start the flow?

 

[DavidM]

I removed the r/w pump and then hooked up to that rubber elbow. I don’t know of an easier way. In the library/misc section (upper right hand corner of this forum) there is an article I wrote with pictures of the 6ly acid flushing procedure.

David