Roger Long
Senior Member
Thanks to Standard Horizon changing the cable configuration on their newer remote mike's, I had to run a new cable down the 4 inch S.S. conduit from the flybridge to the inside console. I also needed to run a Seatalk cable for a depth sounder repeater.
We tried pulling the two new cables with the old one but no cigar. Although there seemed to be sufficient clearance, the old mike cable evidently was braided around all the other stuff.
I found a piece of that split white tubing lifeline cover on board and was able to shove that up the conduit. It was then easy to slide one cable down, pull the tube out, and repeat.
Now, I just have to solder all those tiny little wires together and we'll be ready to leave.
We tried pulling the two new cables with the old one but no cigar. Although there seemed to be sufficient clearance, the old mike cable evidently was braided around all the other stuff.
I found a piece of that split white tubing lifeline cover on board and was able to shove that up the conduit. It was then easy to slide one cable down, pull the tube out, and repeat.
Now, I just have to solder all those tiny little wires together and we'll be ready to leave.