Starting battery ?
- Thread starter lipets
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
ranger58sb
Guru
Can't speak to that very well with no further info.
Your Yanmar manual will tell you minimum cranking amps recommended.
You might have charging considerations, especially if your starting battery and house batteries share a charger: bulk/absorption and float voltage selection, type, size (capacity), etc.
You might also have physical considerations: easy vs. difficult to service, off-gassing implications, etc.
-Chris
Your Yanmar manual will tell you minimum cranking amps recommended.
You might have charging considerations, especially if your starting battery and house batteries share a charger: bulk/absorption and float voltage selection, type, size (capacity), etc.
You might also have physical considerations: easy vs. difficult to service, off-gassing implications, etc.
-Chris
I used a Group 31 on my 6LY STP of 800+ CCA. Worked fine.
Another thread said that Yanmar called for 120 Ah for the starting battery for 6LP or 6LY, can’t remember, which is wierd. Only CCA or MCA should matter.
David
Another thread said that Yanmar called for 120 Ah for the starting battery for 6LP or 6LY, can’t remember, which is wierd. Only CCA or MCA should matter.
David
Last edited:
rgano
Guru
- Joined
- Oct 8, 2007
- Messages
- 4,995
- Location
- USA
- Vessel Name
- FROLIC
- Vessel Make
- Mainship 30 Pilot II since 2015. GB-42 1986-2015. Former Unlimited Tonnage Master
I have a pair of Odyssey AGM GP 34s (around 800 CCA each) in parallel as a starting bank for my 6LPA-STP. Can't pull my finger off the starting rocker switch fast enough!
