|
06-01-2020, 01:24 PM
|
#1
|
Guru
City: Everett WA.
Vessel Name: Triton
Vessel Model: 48' Golden Egg Harbor
Join Date: May 2019
Posts: 713
|
Oil on the deck
After reading countless treads and a few books on the subject I decided to Oil the deck. And I love it ! The deck was not in all that great of shape, missing bungs were replaced but I decided not to sand/bleach. Just a gentle cleaning two days before with soap and water. I know it will be an endless process now that I started it. But its covered 99% of the time.
Now to let it dry and add a few more coats.
|
|
|
06-01-2020, 03:06 PM
|
#2
|
Veteran Member
City: Pensacola
Vessel Name: Always Late
Vessel Model: Marine Trader 44 DC
Join Date: May 2020
Posts: 94
|
I like it. I'm doing the same thing when I finish the caulk job. Thinking about doing the hand rails also, sick of varnishing over and over but don't want to paint it. A lot easier to clean and oil!
|
|
|
06-01-2020, 03:25 PM
|
#3
|
Guru
City: Oconto, WI
Vessel Name: Best Alternative
Vessel Model: 36 Albin Aft Cabin
Join Date: Oct 2012
Posts: 3,145
|
I am painting mine, right over several layers of Sikkens. I'll let you know how it goes when I get it done.
pete
|
|
|
06-01-2020, 05:30 PM
|
#4
|
Guru
City: Southport, FL near Panama City
Vessel Name: FROLIC
Vessel Model: Mainship 30 Pilot II since 2015. GB-42 1986-2015. Former Unlimited Tonnage Master
Join Date: Oct 2007
Posts: 4,984
|
That dark deck is fine up there, but if you did it down here, as I mistakenly did once, you would live to regret the huge increase in heat on the deck - no barefooting until it all went back to natural silver of aged teak.
__________________
Rich Gano
FROLIC (2005 MainShip 30 Pilot II)
Panama City area
|
|
|
06-02-2020, 01:13 AM
|
#5
|
Guru
City: hawaii
Vessel Name: #31
Vessel Model: ex-Navy MUB 50 fish/cruise
Join Date: Aug 2013
Posts: 873
|
Quote:
Originally Posted by rgano
That dark deck is fine up there, but if you did it down here, as I mistakenly did once, you would live to regret the huge increase in heat on the deck - no barefooting until it all went back to natural silver of aged teak.
|
Good point, and the hotter it gets, the more quickly the oil goes away!
I’m a big fan of plastics... just sayin’
__________________
You can lead a horse to water,
But you can't make him ski...
|
|
|
06-02-2020, 10:07 AM
|
#6
|
TF Site Team
City: Westerly, RI
Vessel Name: N/A
Vessel Model: 1999 Mainship 350 Trawler
Join Date: Jan 2014
Posts: 4,162
|
I used to oil my fathers teak when I was a kid. I used to have to hose it down, powdered teak cleaner, then scrub brush, rinse, then once it dried, oil. It seemed like I was doing it constantly, but was honestly probably only once a month. It used to look great. I have no external teak on my boat now.......I wonder why??
|
|
|
06-02-2020, 10:33 AM
|
#7
|
Guru
City: Dewatto
Vessel Name: CHiTON
Vessel Model: Tung Hwa Clipper 30
Join Date: Jan 2020
Posts: 1,096
|
I was wondering if teak oil (or anything else) could work as a sufficient sealant to ward off the dreaded Taiwanese deck rot. My FB deck and fore deck were replaced with epoxy and glass with Kiwi Grip. The side decks and cockpit are all that remain of the original wood and are still solid (knock on teak). Is there any possibility that a product might seep down into areas and seal out water, protecting against future problems? I'm not a big fan of finished teak decks, but if it protects both the teak and what's under it, I'm all for it.
__________________
Marco Flamingo
|
|
|
06-02-2020, 12:43 PM
|
#8
|
Guru
Join Date: Jun 2008
Posts: 5,037
|
Oil looks great when it it is first applied. We used oil on our first boat. After a couple of weeks it would start to get black in the grains, plus all the time it tracked into the boat.
Not a fan of oil. We like the weathered look washed (hosed not scrubbed) down occasionally with salt water.
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
|
|
|
06-02-2020, 08:50 PM
|
#9
|
Guru
City: Pender Harbour, BC
Vessel Name: Gwaii Haanas
Vessel Model: Custom Aluminum 52
Join Date: Sep 2013
Posts: 3,791
|
Doesn’t the oil attack the sealant? And you get black stuff living on your deck.
It may also be slippery in bare feet when its wet?
It most definitely will not stop deck rot! Taiwanese trawlers are infamous for that and need aggressive repairs.
__________________
Don't believe everything that you think.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Trawler Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|