Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-29-2016, 12:09 PM   #1
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
New Hardtop upgrade

Recently upgraded from canvas to a hardtop for a comparable price. The beauty of this top is it is guaranteed for 10 years and will last 4-5 times longer than canvas. It is made out of 5/16" poly-carbonate and anodized aluminum and very light compared to fiberglass. When I took it out the first time it was 20 degrees cooler underneath than canvas.

Watertime
watertime51 is offline   Reply With Quote
Old 12-29-2016, 12:12 PM   #2
Guru
 
Sailor of Fortune's Avatar
 
City: St Augustine,Fl
Join Date: Sep 2009
Posts: 3,798
We need pics!
Sailor of Fortune is offline   Reply With Quote
Old 12-29-2016, 12:49 PM   #3
Guru
 
Nomad Willy's Avatar
 
City: Concrete Washington State
Vessel Name: Willy
Vessel Model: Willard Nomad 30'
Join Date: Oct 2007
Posts: 18,743
watertime51
"Polycarbonate" sounds like plastic. Plastic is heavy.
__________________
Eric

North Western Washington State USA
Nomad Willy is offline   Reply With Quote
Old 12-29-2016, 02:31 PM   #4
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
Upgrade to Hardtop

Here are some pics I hope they are helpful. If your interested go to Home | Hard To Top and you can get a free quote and find out all the details. The tops are lightweight and a great value

Watertime51
Attached Thumbnails
DSCN1715.jpg   DSCN1721.jpg  
watertime51 is offline   Reply With Quote
Old 12-29-2016, 04:18 PM   #5
Valued Technical Contributor
 
DavidM's Avatar
 
City: Litchfield, Ct
Join Date: Aug 2012
Posts: 6,785
Quote:
Originally Posted by Nomad Willy View Post
watertime51
"Polycarbonate" sounds like plastic. Plastic is heavy.
Not necessarily. If you go to the manufacturer's web site, there is a picture of the main material- polycarbonate structured sheet. It is not a solid sheet of plastic, which I agree would be heavy. It is two thin panels separated by spacers, all extruded as one system.

See the following:

DavidM is online now   Reply With Quote
Old 12-29-2016, 05:18 PM   #6
Senior Member
 
tallswede's Avatar
 
City: Baytown, Texas
Vessel Name: Islander
Vessel Model: Prairie 36
Join Date: May 2013
Posts: 290
I like it!

Kevin
tallswede is offline   Reply With Quote
Old 12-29-2016, 05:22 PM   #7
Guru
 
cardude01's Avatar
 
City: Victoria TX
Vessel Name: Bijou
Vessel Model: 2008 Island Packet PY/SP
Join Date: Nov 2012
Posts: 5,290
Looks really nice.
cardude01 is offline   Reply With Quote
Old 12-29-2016, 06:23 PM   #8
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,185
Had one on my F32 Trojan, loved it. Just installed on on my 41' President. Am having EZ2CY panels made for the front of the flybridge and back about 2' on each side. I will fabricate the rest of the flybridge enclosure after the front panels arrive in mid January. The 41' hardtop was way more work to install than the 32'. We ended up putting 2X6s up in the rafters of the storage barn and doing some of the installation from on top. But overall, no leaks through the old canvas bimini and you get more light inside the bridge with the Hard to Top.
Comodave is offline   Reply With Quote
Old 12-30-2016, 08:03 AM   #9
Guru
 
City: kemah
Join Date: May 2015
Posts: 1,135
This is an ad right? The first pic has been on their website for some time now.
what_barnacles is offline   Reply With Quote
Old 01-02-2017, 09:54 AM   #10
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
Thanks for the compliment. Hey if your interested check them out hartotop .com
Watertime51
watertime51 is offline   Reply With Quote
Old 01-02-2017, 10:04 AM   #11
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
Quote:
Originally Posted by tallswede View Post
I like it!

Kevin
cardude01
Thanks for the compliment. The to lets a lot more light in and it is light and very durable
watertime51 is offline   Reply With Quote
Old 01-02-2017, 11:11 AM   #12
Guru
 
foggysail's Avatar
 
City: Ashland, MA
Vessel Model: 1990 Silverton 40 aftcabin
Join Date: Jul 2016
Posts: 1,208
Yes, the hardtop does look nice and maybe something to consider (IMHO) depending on where you store your boat during winters. My latest hardtop covers the helm and is my second purchase from Atlantic Towers. The first covers our rear deck that I installed 10 years ago. Today it looks almost new.

Here in Massachusetts there are times when we get snow....and a lot of it! I would be concerned about the mechanical strength of a hardtop along with the support structure strong enough for 18"+ of heavy wet snow even if shrink wrapped.
foggysail is offline   Reply With Quote
Old 01-02-2017, 11:52 AM   #13
TF Site Team
 
koliver's Avatar
 
City: Saltspring Island
Vessel Name: Retreat
Vessel Model: C&L 44
Join Date: Nov 2007
Posts: 5,663
I have a similar hardtop at home. It is the top cover of a Carport I bought at Costco a few years ago. The polycarbonate is strong enough for its intended use, but the open ends make it hard to keep clean. When I first power washed it to get the accumulated tree droppings and pollen off, some of the wash water entered the open squares and has remained there, somewhat unsightly, ever since. The rest of the structure is way too heavy for any nautical use, but the panels appear to be identical to the ones shown above.
__________________
Keith
koliver is online now   Reply With Quote
Old 01-02-2017, 01:54 PM   #14
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
Keith,
The poly-carbonate is 5/16 thick. 8' x 10' weighs approximately 100lbs. As for the staining call Rodney at Hard to Top 888-306-6136 he may be able to help

Greg
watertime51 is offline   Reply With Quote
Old 01-02-2017, 01:55 PM   #15
Member
 
watertime51's Avatar
 
City: punta gorda, fl
Vessel Name: Saorsail
Vessel Model: Mainship Trawler
Join Date: Dec 2016
Posts: 7
Quote:
Originally Posted by foggysail View Post
Yes, the hardtop does look nice and maybe something to consider (IMHO) depending on where you store your boat during winters. My latest hardtop covers the helm and is my second purchase from Atlantic Towers. The first covers our rear deck that I installed 10 years ago. Today it looks almost new.

Here in Massachusetts there are times when we get snow....and a lot of it! I would be concerned about the mechanical strength of a hardtop along with the support structure strong enough for 18"+ of heavy wet snow even if shrink wrapped.
the poly-carbonate is rated a 25lbs per foot
watertime51 is offline   Reply With Quote
Old 01-02-2017, 04:52 PM   #16
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,185
On our previous boat, we had an Atlantic Towers hardtop over the cockpit and a Hardtotop on the flybridge. Both had advantages. The AT hardtop was beautiful, but in comparison about 5 times more money. The Hardtotop was much more economical and very easy to install. On our current President 41, we have a fiberglass hardtop on the sundeck and we just put a Hardtotop on the flybridge. We are in Michigan but we store the boat inside so snow load is not an issue. If I were going to store it outside with it shrinked, I would build a removable frame to put on top of the Hardtotop and have some slope so that the snow would slide off more easily. Overall, we really like the Hardtotop, but we know and accept the limitations of the top. Being retired, I would rather save the huge amount of money in comparison to the Atlantic Towers hardtop and spend it on something else for the boat...
Comodave is offline   Reply With Quote
Old 01-02-2017, 05:40 PM   #17
Guru
 
foggysail's Avatar
 
City: Ashland, MA
Vessel Model: 1990 Silverton 40 aftcabin
Join Date: Jul 2016
Posts: 1,208
I have seen a few "home made" hardtops and for the most part, they look it. The OP's hardtop looks just fine!
foggysail is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012