Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-14-2018, 10:52 PM   #1
Senior Member
 
City: Lutz
Join Date: Jan 2016
Posts: 473
Glass VS Plexiglass???

Im repairing 2starboard salon window lights on my 1983 MTDC . Its a big job. Im wondering if I should replace the broken panes of laminated glass with Plexiglass???? Thanks
geoleo is offline   Reply With Quote
Old 08-14-2018, 11:09 PM   #2
Guru
 
tiltrider1's Avatar
 
City: Seattle
Vessel Name: AZZURRA
Vessel Model: Ocean Alexander 54
Join Date: Aug 2017
Posts: 4,308
Plexiglass has a high expansion and contraction rate with temperature changes. Everything depends on the size you need.
tiltrider1 is offline   Reply With Quote
Old 08-14-2018, 11:43 PM   #3
Guru
 
ssobol's Avatar
 
City: Southwest MI
Vessel Name: Sobelle
Vessel Model: C-Dory 22 Cruiser
Join Date: Mar 2015
Posts: 1,229
Plexiglass is also much easier scratched. You need proper cleaning materials and due care. Plexiglass can also build up a static charge than can attract stuff.

Plexiglass will degrade with time due to UV.
ssobol is offline   Reply With Quote
Old 08-15-2018, 04:03 AM   #4
Senior Member
 
BIG CAT's Avatar
 
City: Kiln,MS
Join Date: May 2016
Posts: 457
Wouldn't a polycarbonate like lexan be a better choice than plexiglass? Plexiglass breaks too easy Imo.
BIG CAT is offline   Reply With Quote
Old 08-15-2018, 08:17 AM   #5
Guru
 
City: gulf coast
Join Date: Jun 2014
Posts: 3,440
Why is it such a big job? Boat windows are often tempered glass not laminated and lift out.
bayview is offline   Reply With Quote
Old 08-15-2018, 08:27 AM   #6
Guru
 
psneeld's Avatar
 
City: Ft Pierce
Vessel Name: Sold
Vessel Model: Was an Albin/PSN 40
Join Date: Oct 2011
Posts: 28,148
Assuming you can get the wooden frames apart easily...guessing that based on the MTDC and window lights are fixed windows.
psneeld is online now   Reply With Quote
Old 08-15-2018, 08:40 AM   #7
Guru
 
jleonard's Avatar
 
Join Date: Jun 2008
Posts: 5,037
Go with laminated safety glass. You can get them tinted as well which will help reduce heat inside.
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
jleonard is offline   Reply With Quote
Old 08-15-2018, 08:40 AM   #8
Guru
 
TDunn's Avatar
 
City: Maine Coast
Vessel Name: Tortuga
Vessel Model: Nunes Brothers Raised Deck Cruiser
Join Date: Feb 2015
Posts: 889
I would use tempered glass or laminated safety glass. Glass is much more durable than plexiglass or lexan. Glass doesn't scratch as easily or craze although after many years the plastic layer in laminated safety glass can become cloudy. Glass will also be lighter since you will need much thicker plexi or lexan to get adequate strength.
TDunn is offline   Reply With Quote
Old 08-15-2018, 08:55 AM   #9
Guru
 
City: Full Time Cruising East Coast
Vessel Name: Meridian
Vessel Model: Krogen-42
Join Date: Aug 2011
Posts: 1,014
Not sure you want tempered glass as it will shatter in to small pieces.
__________________
-------------------------
Terry
Meridian
KK-42097
meridian is offline   Reply With Quote
Old 08-15-2018, 09:22 AM   #10
Senior Member
 
City: Fayetteville, NC
Vessel Name: Dirty Deeds
Vessel Model: Maritimo 48
Join Date: Jun 2015
Posts: 331
I've tried Lexan and other polycarbonate sheets in construction equipment, to replace windows broken by vandalism or tree limbs. Within a couple of years it's so cloudy or scratched that the visibility is greatly reduced.

If you need light transmission, and don't care about clarity, I'd say go for it. You can cut and shape plexiglass with common woodworking tools.
ABfish is online now   Reply With Quote
Old 08-15-2018, 09:23 AM   #11
Guru
 
tiltrider1's Avatar
 
City: Seattle
Vessel Name: AZZURRA
Vessel Model: Ocean Alexander 54
Join Date: Aug 2017
Posts: 4,308
Polycarbonate while stronger than acrylic/plexiglass scratches very easy. Laminated glass is what I have always seen as the window material. Port lights are often made of polycarbonate, more impact resistance.
tiltrider1 is offline   Reply With Quote
Old 08-15-2018, 11:10 AM   #12
TJM
Senior Member
 
City: Essex, Ct.
Vessel Name: Harmony
Vessel Model: 1982 41' President
Join Date: May 2013
Posts: 442
As stated above, Polycarbonate is not UV stable and will degrade and get cloudy within a few years.
I also struggle with the laminated glass with the middle "tinted" layer starting to degrade over time. Apparently the edges are not sealed and the air wicks inside the middle. I have this on my boat now and it drives me crazy.
I was told that you cant tint tempered safety glass ???
__________________
Tom
"Harmony"
1982 41' President
TJM is offline   Reply With Quote
Old 08-15-2018, 12:08 PM   #13
Guru
 
diver dave's Avatar
 
City: Palm Coast, FL
Vessel Name: Coquina
Vessel Model: Lagoon 380
Join Date: Jan 2017
Posts: 2,570
Cars have tinted windshields made of sandwich glass. Car side windows are tinted tempered. I have not seen tempered and sandwiched “safety” in the same piece. Seems possible though.
diver dave is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Trawler Port Captains
Port Captains are TF volunteers who can serve as local guides or assist with local arrangements and information. Search below to locate Port Captains near your destination. To learn more about this program read here: TF Port Captain Program





All times are GMT -5. The time now is 12:59 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012