Bow cleat chock

[Retiredmx]

Going out on a limb here...looking for a line chock for our 1989 48ft CPMY. Pic is of the port side, we need the starboard side (not sure it matters). Overall length is ~8 3/8 in, screw holes are 6 1/2 in, on center.

 

[amdavis]

line chock

That should be an easy find in most any marine store or catalog.

 

[BruceK]

Going out on a limb here...looking for a line chock for our 1989 48ft CPMY. Pic is of the port side, we need the starboard side (not sure it matters). Overall length is ~8 3/8 in, screw holes are 6 1/2 in, on center.

I would call that a fairlead. Might be different over there, or it might help a shop assistant (or a search)find one.

 

[rgano]

That's technically an open chock. Many mistakenly call the closed chocks in their bulwarks hawse holes.

 

[Osprey69]

I replaced my 1985 era chocks by perusing E-Bay. Perfect replacement and they were new old stock. Takes a bit of searching, but it is out there.

 

[FlyWright]

https://www.fisheriessupply.com/schaefer-marine-stainless-steel-bow-chocks

 

[Comodave]

I bought some large chocks from Hamilton Marine for our last boat.