Thread Tools Search this Thread Display Modes
Old 07-01-2014, 05:23 AM   #1
Senior Member
Sunset's Avatar
City: Sharbot Lake
Country: Canada
Vessel Name: Manatee
Vessel Model: 1976 Albin 25 DeLuxe
Join Date: May 2013
Posts: 277
A25 aft-cabin drain?

Unable to remove the stripped drain plug from the underside of the hull, I have used my vacuum hand pump to remove the accumulated water from the deep bilge in prep for launch. Yesterday I discovered bilgie water under the floor board of the centre panel in the aft cabin but after sucking it dry it continued to receive a limited amount of water from a 1-cm drain hole located in the fwd part of this area. The floor of this area is substantially higher than the lower area of the bilge so I want to know the purpose of this hole and the source of the (minor) inflow. It should be dry under there for some storage!

1976 Albin 25 DeLuxe; 1990 Thundercraft 1750
Sunset is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 11:08 AM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2006 - 2012