rocky6450
Veteran Member
- Joined
- Jan 25, 2013
- Messages
- 26
- Location
- USA
- Vessel Name
- Boadicea
- Vessel Make
- 44' 1986 Marine Trader LaBelle
Hi All. First time posting. Had bent shaft which was replaced along with the transmission and all cutlass bearings, and motor mounts Still vibrating. Had prop re conditioned. Better, but still vibrates at 2000 rpm and above. I am at a loss. What else can it be ? The damage was caused either by tranny seizing or old motor mounts giving way. Shaft was bent pretty good. Broke all bolts on coupling. Did not hit anything. Thanks Paul