sanderling18
Member
does anyone know where the water tank sensor is located and how to gain access. the tank gauge does not work no matter how much water is in tank.
MS 430 Sedan water tank sensor
- Thread starter sanderling18
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
mrinkel
Member
- Joined
- Sep 18, 2017
- Messages
- 21
- Location
- United States
- Vessel Name
- Positive Latitude
- Vessel Make
- Mainship 430
I replaced the gauge in the galley as my first attemp to fix the problem. Unfortunately, the problem is likely the sender unit on the actual port tank. After communicating with another owner about the difficulty in accessing the port freshwater tank under the galley floor, I followed his solution and just ordered a Jakmeter (http://www.jakmeter.com/) which I will install next to the freshwater pump. The only draw back is that I need to reset the meter each time a fill the tanks.
-Mark
-Mark
