hydraulic steering

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

GreenSailor

Member
Joined
Nov 6, 2014
Messages
20
Location
USA
Any idea if all the Twainese trawlers have the same hydraulic steering and what the layout looks like? I would like to install an autopilot on a President 37.
 
Don't know if they are all the same, but my Nova has an air over oil system with a Wagner auto-pilot.
 
I don't know the answer to your question but all you really need to know is the volume of the steering cylinder which you could figure from its measurements or by draining.
 
I have a 35 SENATOR, the last two winters I have had to recharge the system.. It is air over oil, meaning only that the oils is under a sealed pressurized system.. Wondering if the loss of fluid, could be a result of sever temperature change. The steering block in an aluminum billet with same male connectors. The tubing is copper with what I think are brass fittings . Could the metals be expanding at a different rate causing a possible loss of air and oil?
The oil is about $28 a 1quart but more the pain bleeding the system down and recharging.
 

Latest posts

Back
Top Bottom