sealandsky

I bought an AGM garden tractor sized battery (forgot the designation) for my 25 HP Yamaha with electric tilt. It works great and have...

The gypsy takes 3/8 to 1/2" short link chain and/or 5/8 to 7/8 rode.

I agonized over this issue last winter and settled with 1/2" CROMOX stainless chain with 60 feet of chain and 250 feet of 8 plait 5/8"...

Side note: when I buy my next anchor chain, I will have them weld a couple links of chain the next size up on both ends. I found that...

Earlier this year we installed a Maxwell RC12 HD and Maxwell has a compatible rode / chain counter. Not sure about a wireless remote...

Not knowing the design of your flybridge - Just throwing it out there that you might cut strategic access panels.

At least we are still all more intelligent than AI. Where I get concerned is the day that is reversed. It will come at some point...

I’m going to need a bigger windlass for my 3 ton anchor.

Hi Doug - We installed a Gen III Starlink over last winter and my experience was the same as yours "what - gen III"? I've attached a pic...

I have a ProMariner ProNautic 1240P 40 amp, 3 bank charger that was just removed from my boat in good working order. Nothing at all...