Nick F

This problem is not uncommon on Taiwanese trawlers of this vintage. My belief is that it is a corrosion problem in most cases. My...

As for attaching to the tube for a slide hammer, there are some options which engage on the inside diameter. A device like an expanding...

I am solidly with Paul. Make yourself a slide hammer. Biggest problem is cleaning up your partly damaged threads - use a Dremel disc...

Good point, Comodave. You must close the loop with the surveyor.

The supply line from the dosing pump to my diesel heater (Espar) is about 10 feet long and is a tiny nylon tube (2mm ID, 3.5mm OD). This...

I have three Oberdorfer raw water pumps which came off my 1974 JD6404 diesels. One pump rebuilt last year. The other two are...

My GB42 has what seems to be the same arrangement as your boat. I believe it to be impossible to completely comply with ABYC guidelines...

Thanks for all your hard work!