The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
I

Latest activity Postings Media Albums About

    • I
      Iggy replied to the thread Cleaning Racor filters.
      I this bought rebuild this kit and cleaned the bowl. https://www.jamestowndistributors.com/product/product-detail/6448 for $55. I found...
    • I
      Iggy replied to the thread raymarine gps antennae replacement.
      What about a Marine Satellite Compass
    • I
      Iggy replied to the thread Solar arch frame installed.
      To the OP. Vary nice and wish you good luck with it! I have been trying to come up with a way to mount 3 panels on my boat. But its not...
    • I
      Iggy replied to the thread electrical connector question.
      This was not mentioned or I didn't catch it in the first few post "The existing circuit remains open when the generator is not running."
    • I
      Iggy reacted to ranger58sb's post in the thread Looking for advice please. with Like Like.
      I'd start with engines, too. Probably replace all the hoses, service heat exchangers and aftercoolers, replace gear oil coolers, etc...
    • I
      I your using a Victron DC2DC charger. The charger just wants to see ether a Neg or Pos voltage. There is no load or its in the milliamp...
      • 1643366920_upload_products_266_266-Orion-Tr non-isolated.png
    • I
      Welcome! Good luck on the new boat!
    • I
      Iggy replied to the thread electrical connector question.
      I agree with the above. But would be cautious in this. That's why my answer was short. You could back feed the whole boat. I would...
    • I
      Iggy replied to the thread electrical connector question.
      Not understanding you question. What exactly are you trying to do?
    • I
      Iggy replied to the thread Need Simrad Guru.
      Could there be a setting in the camera? Maybe a dip switch? No brand name or model was mentioned.
    • I
      Iggy replied to the thread Why did voltage drop?.
      My thought and I could be wrong. The charger went into a sleep mode since the batteries where fully charged. When the voltage went down...
    • I
      Iggy replied to the thread LITHIUM HOUSE AGM STARTERS.
      I never said my setup was in dispute. I am not understanding why your asking the questions that you do. Also playing with my words. I...
    • I
      Iggy replied to the thread LITHIUM HOUSE AGM STARTERS.
      As mentioned, If the BMS disconnects the Alt will burn up. Or you must add a protection device and that device is not 100% fool proof...
    • I
      Iggy replied to the thread LITHIUM HOUSE AGM STARTERS.
      My ALT is a Balmar with a programable and external regulator. It can be set to flooded, gel, or AGM profiles. Along with other setting...
    • I
      Iggy replied to the thread Pacific Trawler.
      I get the fading, that's a given. But I rather have the closest thing and than work from there. From the 3 gel coats that I have...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom