The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
IMG 2520 Underside of the masthead fitting and the top of the aluminum mast.
2016 06 17 Mast 002 Trial assembly. Wiring chase cover.
2016 06 17 Mast 001 Trial assembly. Spreader lights and burgee halyard blocks.
IMG 2521 The anchor light support is epoxied to the rest of the masthead fitting. Lots of filleting with epoxy to do. Lots of rounding corners, etc
IMG 2520 Underside of the masthead fitting and the top of the aluminum mast.
IMG 2519 The mast is just sittin' together. The masthead fitting is slipped into the aluminum mast. The Raymarine bolts onto the pad. Spreader ligh
IMG 2518 The masthead fitting just sittin' together. The homemade tube fits into the aluminum mast. The Raymarine bolts onto the pad. Spreader ligh
2016 06 12 MastTubes 002 The three tubes are on the hot, sunny asphalt for their post cure.
DHeckrotte

IMG 2520 Underside of the masthead fitting and the top of the aluminum mast.

There are no comments to display.

Media information

Album
Making a new Mast
Added by
DHeckrotte
Date added
View count
11
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom