The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

2016 03 05 LazaretteHatch 001 The finished core.

2016 03 08 LazaretteHatch 001 Making new stainless steel backup plates for the Perko lifts. The machine screws are tapped into the stainless, no nut

2016 03 07 LazaretteHatch The ballast locates a dam against which to pour filler to bring the bottom of the hatch down to the correct thickness.

2016 03 05 LazaretteHatch 003 Laminating the bottom skin, fiberglas roving in epoxy. The spring stick and the ballast force the perimeter tight to t

2016 03 05 LazaretteHatch 001 The finished core.

2016 03 04 LazaretteHatch 001 Fiberglass roving in epoxy and a lamina of 1/2" end grain Balsa. Ballasted with 2 1/2lb lead ingots for clamping and m

2016 03 03 LazaretteHatch 003 Patching the underside of the Teak

2016 03 03 LazaretteHatch 002 Dutchmen at hinge positions

2016 03 05 LazaretteHatch 001 The finished core.

DHeckrotte
May 13, 2016

There are no comments to display.