The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

  • 0
  • 0
I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

  • 0
  • 0
When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

  • 0
  • 0
My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

  • 0
  • 0
I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

  • 0
  • 0
Checking the new panel with the old.

Checking the new panel with the old.

  • 0
  • 0
Cutting out the new panel. I used Sailrite's 24oz boat topping.

Cutting out the new panel. I used Sailrite's 24oz boat topping.

  • 0
  • 0
I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

  • 0
  • 0
20151008 175930[1]

20151008 175930[1]

  • 0
  • 0
20151009 153604[1]

20151009 153604[1]

  • 0
  • 0
20151009 143744[1]

20151009 143744[1]

  • 0
  • 0
20151008 175930[1]

20151008 175930[1]

  • 0
  • 0
20151009 153604[1]

20151009 153604[1]

  • 0
  • 0
20151009 143744[1]

20151009 143744[1]

  • 0
  • 0
Lollygag

New canvas panel

Sewing a new quarter panel for the cockpit.
Click to expand...
There are no comments to display.

Album information

Album owner
Lollygag
Date created
Item count
14
View count
12
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Lollygag

Lollygag

Media items
74
Albums
7
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top Bottom