The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

OK, this is what the hatch looks like with the frame in place. I'm pretty happy with the way it turned out. I'll epoxy in the frame and then sand it

Here is a picture of the hatch with the spacer pieces, frame and hatch all in place, waiting for the glue and epoxy to set. You can see the waxed pap

hatch

OK, this is what the hatch looks like with the frame in place. I'm pretty happy with the way it turned out. I'll epoxy in the frame and then sand it

This is a picture of the cross braces I put in to support the hatch and the flooring at the edges of the passageway. I was going to put them in verti

This is the plug, cut down to the marks made earlier, banded with the white oak I cut the other day and clamped tight.

Then it was done. You can see how small the trim pieces are. You can also see all the crap in the bilge. It was just dark and scary before. Now it

Then it was done, except for cutting the plug to size and banding it, I'll cut the frame when I finish the plug and install it with thickened epoxy t

OK, this is what the hatch looks like with the frame in place. I'm pretty happy with the way it turned out. I'll epoxy in the frame and then sand it

Lollygag
Sep 8, 2014

There are no comments to display.