Search results

It was extended with the engine conversion, so longer means more fuel efficient, usually.

If you remove drug related crime and self deletions from the gun stats, it's a non-starter. More people drown in their own swimming pools than gun deaths.

production electric boats Being in Central Florida, I know that Nautique has a ski boat that's 100% electric and they have now started a secondary company called Ingenity to build all electric boats. https://ingenityelectric.com/ The downside is that they only run 2-4 hours on a charge....

PEX is not UV stable, so keep it out of the sun! No PEX tubing is rated for use when sun or other UV sources can damage it... It gets brittle quickly with UV exposure. If you want to bend pex in unique shapes, use pex al pex products which is a layer of aluminum tubing with pex on the inside...

Brother has a laminated label maker that includes a flag option so the text is written twice and you fold it over the wide and stick the label to itself. Since it is laminated, there is a clear tape over the printing to prevent fading and smudging. I used zip ties with tabs on them once, but...

There are better battery packs with more storage and less money... Check out Big Battery dot com...

Toe Nail snippers trim off the ends of Zip ties and don't leave a sharp edge. You won't get cut or get wiring insulation faults caused by sharp zip tie ends...

Gold Leaf?

The downbound power boat has right of way, if the current was from your stern, you have right of way, and up current is the give way vessel.

At some point, the restaurant will either do a voucher system to validate dinghy parking and a negotiated rate with the marina, or perhaps offer a pickup / drop off service for dinner guests... Sort of a dinghy uber service for their patrons.

SpaceX uses thrustmaster drives to position control their landing barges. IT has to be at the right place at the right time or they lose a rocket...

With a azimuthing drive, why would you have a rudder? Added stability?

That hole almost looks drilled! Perhaps it had been there all along, and the cushion material sealed the hole... for a while. Poultice corrosion does not look like that, and would be more general, pitting the area rather than one single round hole.

There are engine hatches just inside the salo[o]n which seems almost centered in the boat... Besides, it's wood, cut wherever you need to cut... You can always glue it back :)

Apparently, the voodoo has a foil between the hulls to lift the majority of the boat out of the water, allowing it to go faster and be more efficient at speed. I'd like to see a photo of it on a travellift.

An RV'er in Australia did a good review of a bunch of diesel heaters and found the 8kw heaters didn't do any better than a 5kw heater, and if you take them apart, you'll find the same parts... so the 8kw is simply marketing lies. He also compared them against espar and found them incompatible...

Some DVR or radios had quite close together BNC terminals, and it's hard to push down on the outer ring of the bnc and give it a quarter turn to lock or unlock a BNC connector. Especially if there is a neighboring BNC 1/4" away from the one you're working on. The BNC tool has a slot down the...

I didn't watch the video, just read the Dennison listing... The listing said Fiberglass hull

It says the hull is fiberglass, but.... one of the images appears to have wooden stringers and wooden planking just aft of the anchor locker. Maybe it is fiberglass over wood?

it needs a live-aboard teak varnisher. Way too much exposed wood for me.

Duracell batteries are about the worst batteries you can put in a device. If possible, install lithium batteries instead of alkaline since lithium batteries will never leak and damage the device. Alkaline batteries always leak, often before they die. Duracell has a warranty to protect you...

Fisheries has several types of plastic planks... Fisheries Supply Company 1900 N. Northlake Way, Seattle, WA 98103 https://www.fisheriessupply.com/

SEATTLE, WA TAP Plastics: SEATTLE, WA 710 9th Avenue North Seattle, WA 98109 Email: tap32@tapplastics.com Open: Monday - Friday 8:30 to 5:30. Saturday 9 to 5. Phone: 206.389.5900

TAP Plastics perhaps? https://www.tapplastics.com/

Did you notice how the rudders are not balanced? I would hope there is power steering or at least hydraulic steering to help you keep it under control. Most boat rudders have 15-20 percent of the rudder blade forward of the pivot pin, making it easier to steer. Without that balance part, it...