View Single Post
Old 08-11-2012, 05:20 AM   #78
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
"it takes quite a load off the winch to actually use the slot to trip it out when raising,"

Breaking out a set anchor is not approved for an electric winch ,
tho it might be an OK risk with a HYD unit.

Power up to the anchor till its straight down, and retrive the slack as you go.

Cleat the line ( Or if using chain , engage the chain stopper) then power slowly till the anchor is free .

Use the windlass to raise the anchor , that's all they are built to do.

FF
FF is offline   Reply With Quote