Quote:
Originally Posted by CaptSoterio
, Should i expect any issues with needing to replace the drive shaft for any weird reason?
|
You should pull the shaft out enough to examine the surface that is inside the stuffing box to make sure it is not badly worn and that it is not corroded. Same with the prop mounting area. Sometimes the packing can wear a small groove and if so you may be able to cut the packing gland hose slightly (or buy a slightly longer one) to avoid that groove so the packing rides on a virgin diameter.
__________________
Jay Leonard
Ex boats: 1983 40 Albin trunk cabin, 1978 Mainship 34 Model 1
New Port Richey, Fl
|