View Single Post
Old 12-07-2019, 03:10 PM   #9
Solly
Senior Member
 
Solly's Avatar
 
City: Solomons MD.
Vessel Name: Sun Runner
Vessel Model: 1985 Mainship 34 Trawler MK III
Join Date: Mar 2018
Posts: 488
I'd go with a piece of SS sheet metal screwed to the bow below the anchor (s). If yours is like the picture there's not much bend right there. Should be able to hand bend the metal for a close fit. Maybe 4 screws and seal the screw holes good.

When it gets dinged just replace it.
Solly is offline   Reply With Quote