Thread: Bonding
View Single Post
Old 10-12-2019, 09:34 PM   #4
C lectric
C lectric's Avatar
City: B.C.
Country: Canada
Vessel Name: Island Pride
Vessel Model: xxxx
Join Date: Oct 2007
Posts: 2,498
The straps look like brass flat strips.

Unless the straps are actually broken then continuity will remain regardless of appearance or any dings or dents.

THe corrosion showing should not matter UNLESS any connections where bonding wires are secured are corroding or are loose. In that case it should simply be mtc. needed.

Remove those with problems, clean them up including the strap at that point and apply a dielectric compound, Silicone grease, or a product like NoAlox.

Then test for any resistance across the connection.

The green verdegris on the strip surface won't matter.
C lectric is offline   Reply With Quote