View Single Post
Old 03-23-2012, 12:01 PM   #71
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
RE: Winter Project I: Charging System Upgrade

Proper crimpers are great , but few own them.

Set the crimp tight with a ground dull chisel and simply dunk the end in a ladle full of solder.

A propane torch will melt a coil into a cast iron ladle .

The requirement is the terminal end must be mechanically secured AND electrically secured.

The above works , and proper color shrink tape makes it look professional.
FF is offline   Reply With Quote