View Single Post
Old 08-12-2019, 11:06 AM   #2
Larry M
TF Site Team
 
Larry M's Avatar
 
City: Jacksonville
Join Date: Nov 2008
Posts: 11,682
We had one for 10 years. The high pressure pump, booster pump, membrane/housing and most of the other parts are off the shelf. The only part that may not be is the panel to adjust the high pressure which also has a flow meter and switch. The panel could be replaced if it failed by a similar one from Cruise RO Watermakers probably. We rebuilt our high pressure pump from parts sourced locally once.

Unless the unit has been pickled correctly within the last year, figure a new 2.5”x40” Dow Filmtec membrane for less than $250 assuming it’s a 600 GPD unit.
Larry M is offline   Reply With Quote