exmaggiedrum
Veteran Member
I am selling the boat and any gear not already installed, which includes this very fine, uninstalled and unused, in excellent to perfect condition, hydraulic pump. It is reversing and is very quiet compared to any other pump you may have seen or heard of. It is a medium-heavy duty pump suitable for larger boats hydraulic steering for an autopilot.
It is fully adjustable from 0-3.5 cubic inch/sec and will work with any cylinder up to 50 cu.in. depending on your lock to lock time needs. This pump is made for Furuno and sold as a HRP35-12. They are the same pump: https://www.furunousa.com/en/support/PUMPHRP35-12
The Furuno link to the manual: https://www.furunousa.com/-/media/sites/furuno/document_library/documents/manuals/installation_manuals/accusteer_hrp_35_instruction_manual_2017.pdf
This pump retails for $1350USD by Furuno and $1400-$1600 elsewhere.
My price: $700 plus you pay shipping from Washington state.
I also have a used/rebuilt/tested Hynautic K-3-B 23.1 cu.in. cylinder I will put in a separate ad. It is a good match for this pump.
It is fully adjustable from 0-3.5 cubic inch/sec and will work with any cylinder up to 50 cu.in. depending on your lock to lock time needs. This pump is made for Furuno and sold as a HRP35-12. They are the same pump: https://www.furunousa.com/en/support/PUMPHRP35-12
The Furuno link to the manual: https://www.furunousa.com/-/media/sites/furuno/document_library/documents/manuals/installation_manuals/accusteer_hrp_35_instruction_manual_2017.pdf
This pump retails for $1350USD by Furuno and $1400-$1600 elsewhere.
My price: $700 plus you pay shipping from Washington state.
I also have a used/rebuilt/tested Hynautic K-3-B 23.1 cu.in. cylinder I will put in a separate ad. It is a good match for this pump.