View Single Post
Old 06-28-2019, 06:16 PM   #6
tiltrider1
Guru
 
tiltrider1's Avatar
 
City: Seattle
Vessel Name: AZZURRA
Vessel Model: Ocean Alexander 54
Join Date: Aug 2017
Posts: 4,308
Don’t worry what was on there. You need to take it all the way down to bare wood. Don’t be afraid to go as low as 60 grit. Then work your way back up to 220. No need to go to 320 on a floor. Recoat the floor with any quality “Swedish” floor finish. They are all one part polyurethane coatings. I would recommend satin or semi gloss. Full gloss will show all the imperfections, great for selling boats but ages poorly. The stuff goes on like water, spreads easy but is very toxic so once it’s down you need to spend the next two days off the boat.
tiltrider1 is online now   Reply With Quote